EUVIMEDEUVIMED entdecken
Crossref

Monitoring of Crack Growth of Composite Plates using Carbon Fiber Sensors

Nikola Schmidová, Karel Doubrava, Zdeněk Padovec, David Blaha, Radek Kottner, Ctirad Novotný, Radek Sedláček, Milan Ruzicka

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33938 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Nikola Schmidová und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Filament-wound glass fiber reinforced polymer (GFRP) vessels are widely deployed in water management systems for the collection, separation, and treatment of stormwater and industrial effluents. During installation as well as long-term operation, these composite structures may be exposed to complex loading scenarios, including localized stress concentrations that can initiate damage and subsequently compromise structural integrity. Reliable structural health monitoring (SHM) methods are therefore essential for detecting strain concentrations and early-stage damage in order to ensure long-term operational safety. Carbon Fiber Sensors (CFS), which utilize changes in electrical resistance to quantify mechanical strain, represent a promising low-cost sensing technology suitable for direct integration into composite structures, see (1). This contribution extends previously published work (2) focused on the strain measurement of GFRP plate-type specimens with a central hole subjected to four-point bending. In the earlier study, CFS and distributed fiber optic sensing (DFOS) were used to evaluate strain distribution and validate sensor performance, with the results showing good agreement between both measurement techniques and finite element method (FEM) simulations. Building on these findings, the present study investigates the sensitivity of CFS sensors to artificially introduced damage in the form of controlled notches of increasing depth representing crack-like defects in the GFRP plates. New experiments are conducted on filament-wound GFRP specimens instrumented with surface-mounted CFS and DFOS sensors. Each specimen is subjected to repeated four-point bending cycles for multiple predefined damage levels. The progressive increase in notch depth enables a systematic evaluation of the relationship between structural response and sensor output. The resulting data shows the determination of functional dependencies between specimen deflection, local strain, CFS resistance change, and crack depth. Particular attention is given to the repeatability of measurements, the detectability threshold of damage, and the influence of sensor placement relative to the defect. Numerical simulations of the experiment are performed using a detailed shell-based FE model consistent with the geometry and material properties of the tested specimens. Strain values are extracted along the paths corresponding to sensor locations and compared with both DFOS and CFS measurements. This comparison provides insight into the accuracy, limitations, and potential application of CFS technology for detecting and quantifying damage in GFRP composites. The experimental and numerical findings confirm that carbon fiber sensors possess adequate sensitivity not only for monitoring global deformation but also for detecting localized damage, such as crack-like defects. The clear correlation between notch depth and electrical resistance response shows their potential for tracking damage evolution in filament-wound GFRP structures. [1] Horoschenkoff, A., & Christner, C. (2012). Carbon Fibre Sensor: Theory and Application. In N. Hu (Ed.), Composites and Their Applications. InTech. https://doi.org/10.5772/50504 [2] Schmidová, N., Doubrava, K., Padovec, Z., Blaha, D., Novotný, C., & Růžička, M. (2024). Bending Analysis of GFRP Composite Plate with a Hole Using Carbon Fiber Sensors. In 62nd Conference on Experimental Stress analysis - Book of Extended Abstracts. CTU.

Zitieren

APA

Schmidová, N., Doubrava, K., Padovec, Z., Blaha, D., Kottner, R., Novotný, C., Sedláček, R., & Ruzicka, M. (2026). Monitoring of Crack Growth of Composite Plates using Carbon Fiber Sensors. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33938

Vancouver

Schmidová N, Doubrava K, Padovec Z, Blaha D, Kottner R, Novotný C, et al. Monitoring of Crack Growth of Composite Plates using Carbon Fiber Sensors. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33938

BibTeX
@article{Schmidov2026,
  author = {Schmidová, Nikola and Doubrava, Karel and Padovec, Zdeněk and Blaha, David and Kottner, Radek and Novotný, Ctirad and Sedláček, Radek and Ruzicka, Milan},
  title = {Monitoring of Crack Growth of Composite Plates using Carbon Fiber Sensors},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33938}
}
Kostenlos starten →