EUVIMEDEUVIMED entdecken
Crossref

Developing multi-type sensor network acquisition devices in a new generation of SHM technologies hardware

Manuel Jesús Justicia Alados, Luigi Trezza, Santiago Guerrero Vázquez, Jaime Garcia Alonso

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33934 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Manuel Jesús Justicia Alados und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

When performing structural tests in Aerospatiale industry, being it as part of the certification process or just to test a specimen having some particular properties, the acquisition equipment used plays a crucial role. Data sources nature depends on what type of test is about to be performed causing multiple kinds of sensors attached to the structure to be needed. It is essential then having versatile equipment able to read from different kinds of sensors. In the past, SHM testing technologies have been using elastic waves propagation as the main source of data, however, environmental and operational conditions effects over elastic waves propagation cannot be belittled. Regarding future tests, having capable of reading elastic wave propagation dedicated sensors and EOCs, primarily temperature, dedicated sensors hardware will be required. The reading of data from piezoelectric sensors has some further requirements including high sampling rate reading due to elastic waves frequency and the capability of actively interrogating the structure in order to know the current structural health status after events have been detected while also saving temperature data. A new evolution of the current SHM testing technologies equipment must come to light to fulfill the new requirements while maintaining all already achieved features. A solution based on a modular, multi-chassis approach combining data acquisition from software synchronized temperature sensors that support later analysis helping on EOCS compensation and piezoelectric sensors will be the new proposed paradigm. This new presented paradigm will improve the previous capabilities presented in the EWSHM 2024 edition with active interrogation, based on pitch-catch configuration, automatization using up to 64 channels, with bandwidth up to 1MHz with configurable rates up to 250Msps. And for the passive acquisition, 125KHz bandwidth with up to 250ksps rate. The automatization enables the equipment to launch active interrogation, by customizing the interrogation signal typically using burst 3 or 5 pulse between 50 and 500KHz, from passive acquisition state when an event above configurable threshold and trigger, depending on particular noise ratio and slope, is detected. As a first approach, this new equipment will fulfill acquisition demands on a currently running empennage test, where previous impacts where successfully detected and events are currently being captured. In this paper, this new development which allows minimum supervision of a running test due to automatization capabilities, collecting events data that will be further analyzed once the test is completed or in parallel to the test will be presented.

Zitieren

APA

Alados, M. J. J., Trezza, L., Vázquez, S. G., & Alonso, J. G. (2026). Developing multi-type sensor network acquisition devices in a new generation of SHM technologies hardware. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33934

Vancouver

Alados MJJ, Trezza L, Vázquez SG, Alonso JG. Developing multi-type sensor network acquisition devices in a new generation of SHM technologies hardware. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33934

BibTeX
@article{Alados2026,
  author = {Alados, Manuel Jesús Justicia and Trezza, Luigi and Vázquez, Santiago Guerrero and Alonso, Jaime Garcia},
  title = {Developing multi-type sensor network acquisition devices in a new generation of SHM technologies hardware},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33934}
}
Kostenlos starten →