EUVIMEDEUVIMED entdecken
Crossref

Damage Detection in Steel Structures Using a Frequency-Steerable Acoustic Transducer-Based SHM System

Octavio A. Márquez Reyes, Jochen Moll, Klaus-Peter Kress, Nicolai Kress, Corinna Hardes, Dirk Treppmann, Joerg Weidenfeller, Felix Harnack, Kilian Tschöke, Peter Kraemer

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33910 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Octavio A. Márquez Reyes und 9 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Structural health monitoring (SHM) using ultrasonic guided waves (UGWs) typically relies on dense sensor networks to enable reliable damage detection and localization, leading to increased system complexity and cost. To address these limitations, this study investigates the use of a frequency-steerable acoustic transducer (FSAT) as a compact alternative capable of directional wave excitation using a single actuator. An experimental investigation is conducted on a conical steel structure representative of industrial geometries. A unidirectional FSAT is employed in a pitch-catch configuration together with a limited number of piezoelectric sensors distributed around the structure. The system is evaluated under pristine and damaged conditions, where a small blind hole is introduced as artificial defect. Guided wave responses are analyzed in both time and frequency domains over a broad frequency range (20–600~kHz), exploiting the FSAT’s frequency-dependent beam steering capability. Damage detection is achieved through differential signal analysis and root-mean-square (RMS)-based damage indicators, which reveal clear sensitivity to the presence and location of the defect. Results demonstrate pronounced frequency-dependent behavior, with a distinct peak response at 350~kHz and significantly reduced sensitivity when the wavefield is steered away from the damage location, confirming directional selectivity. The findings highlight the potential of FSAT-based SHM systems to reduce sensor network requirements while maintaining reliable damage detection and directional sensitivity in complex structural geometries. This work provides an experimental validation of FSAT technology in a realistic structural configuration and represents a step toward simplified and scalable SHM solutions.

Zitieren

APA

Reyes, O. A. M., Moll, J., Kress, K., Kress, N., Hardes, C., Treppmann, D., Weidenfeller, J., Harnack, F., Tschöke, K., & Kraemer, P. (2026). Damage Detection in Steel Structures Using a Frequency-Steerable Acoustic Transducer-Based SHM System. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33910

Vancouver

Reyes OAM, Moll J, Kress K, Kress N, Hardes C, Treppmann D, et al. Damage Detection in Steel Structures Using a Frequency-Steerable Acoustic Transducer-Based SHM System. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33910

BibTeX
@article{Reyes2026,
  author = {Reyes, Octavio A. Márquez and Moll, Jochen and Kress, Klaus-Peter and Kress, Nicolai and Hardes, Corinna and Treppmann, Dirk and Weidenfeller, Joerg and Harnack, Felix and Tschöke, Kilian and Kraemer, Peter},
  title = {Damage Detection in Steel Structures Using a Frequency-Steerable Acoustic Transducer-Based SHM System},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33910}
}
Kostenlos starten →