EUVIMEDEUVIMED entdecken
Crossref

Non-destructive evaluation of manufacturing defects in ultrasonically welded thermoplastic composite joints using Lamb wave

Govinda Gautam, Dheerendra Kr. Dwivedi, Dhanashri M. Jogkekar

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33860 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Govinda Gautam und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Structural integrity of ultrasonically welded thermoplastic composite joints is needed to ensure high-performance in transport, defense and infrastructure where continuous structural health monitoring (SHM) is a key to safe and reliable operation. Defects caused by manufacturing like voids, absence of fusion, and interfacial delamination lead to a significant decrease in the strength of the joints and long-term stability and can change over the course of service. This work describes the formation of a Lamb wave– based SHM system of continuous monitoring, detection, localization, and quantification of the damage in high–density polyethylene (HDPE) lap joints. The experimental research is combined with numerical modelling and sophisticated signal processing to develop a predictive connection between higher and sub–harmonics characteristics of Lamb waves and fault severity level to provide real–time condition of the joints and pathways of the damages. Ultrasonic welding: 20 kHz (45 µm amplitude, 2.5 bar pressure, 1.0 s weld time, 1.5 s hold time) was used to prepare the joint samples. Specimens with intentionally introduced defects (1.9 – 11.6 mm voids i.e. unfused zone and over–melt zone) were fabricated for controlled evaluation. The Lamb wave experiment used broadband PZT transducer as the actuator and sensor, fed with a 5 cycle Hanning–windowed tone burst at 30, 60 and 120 kHz. A Laser Doppler Vibrometer (LDV) was used to measure the full-field wave propagation over the weld region. The profiles of dispersion of the composite lap joint were calculated using a semi-analytical finite element (SAFE) model and checked using frequency wavenumber (f–k) analysis. Harmonical identification and damage–induced scattering was analyzed using short-time fourier techniques (STFT). With the help of the finite element simulations, strong scattering of Lamb waves, lower energy transmission, and sub-harmonic generation were found in damaged areas. The proposed SHM framework, which integrated parameters of normalized amplitude loss and nonlinear index, facilitated quantitative forecast of strength decrease and remnant load bearing capacity of tensile test specimens. These findings indicate that Lamb wave-based SHM offers a quantitative, quick, and sensitive way of continuous integrity monitoring and prognostics of ultrasonically welded composite joints of thermoplastics. The method provides strong correlation with mechanical strength, excellent repeatability, and compatibility with automated SHM for smart polymer-composite manufacturing. The current study extends guided-wave-enabled quality assurance in high-performance thermoplastic structures.

Zitieren

APA

Gautam, G., Dwivedi, D. K., & Jogkekar, D. M. (2026). Non-destructive evaluation of manufacturing defects in ultrasonically welded thermoplastic composite joints using Lamb wave. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33860

Vancouver

Gautam G, Dwivedi DK, Jogkekar DM. Non-destructive evaluation of manufacturing defects in ultrasonically welded thermoplastic composite joints using Lamb wave. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33860

BibTeX
@article{Gautam2026,
  author = {Gautam, Govinda and Dwivedi, Dheerendra Kr. and Jogkekar, Dhanashri M.},
  title = {Non-destructive evaluation of manufacturing defects in ultrasonically welded thermoplastic composite joints using Lamb wave},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33860}
}
Kostenlos starten →