EUVIMEDEUVIMED entdecken
Crossref

Vision-based Modal Analysis using Local Phase Information

Joren Colson, Thijs Willems, Yonggang WANG, Matteo Kirchner, Frank Naets

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33761 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Joren Colson und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Over the past decade, phase-based motion magnification has gained widespread use for its ability to qualitatively visualize the dynamic behaviour of stiff structures by amplifying their small deformations, particularly the deflection shapes at their eigenfrequencies. Compared with image intensity-based methods such as Digital Image Correlation (DIC) and feature tracking, which rely on sufficient surface texture to function effectively, the phase-based method can still infer motion in regions with weak texture as the 2D Fourier decomposition produces a spatially coherent phase field, in which phase information is smoothly coupled across the image domain. This work presents a quantitative analysis to examine the relationship between displacement and phase. Starting from the Fourier Shift Theorem, which states that phase variations can be directly interpreted as measures of displacement, the governing equations are derived. Since phase values are inherently bounded to a range of -π to π, discontinuities occur when the true phase exceeds this range —a phenomenon known as phase wrapping. Different Fourier transform configurations and image processing parameters are explored to address the phase wrapping issue. Within the image field-of-view, phase information is extracted over time at multiple locations —each representing a distinct measurement location. The displacements derived from the image phases are then used as structural responses to perform experimental modal analysis. This approach is applied in a modal analysis on two experimental setups: a cantilever beam and a clamped–clamped beam. The subjects’ modal parameters are calculated through the PolyMAX algorithm. These results are benchmarked against reference accelerometer data, showing minimal differences —with eigenfrequency errors below 0.4% and damping ratio differences under 0.35 percentage points between the phase-based and accelerometer-based methods. Furthermore, the mode shapes obtained from the phase-based analysis exhibit significantly higher spatial resolution, owing to the full-field nature of the measurement. Finally, the analysis also highlights the trade-off between spatial resolution and spectral accuracy in the phase-based method. This can be seen in the gradual decline in accuracy of the proposed method with increasing frequency. Despite remaining challenges —such as spectral noise and limited high-frequency performance imposed by camera sampling rates— the results demonstrate that phase-based motion extraction provides a viable, low-cost, and high-resolution alternative for non-contact modal analysis.

Zitieren

APA

Colson, J., Willems, T., WANG, Y., Kirchner, M., & Naets, F. (2026). Vision-based Modal Analysis using Local Phase Information. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33761

Vancouver

Colson J, Willems T, WANG Y, Kirchner M, Naets F. Vision-based Modal Analysis using Local Phase Information. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33761

BibTeX
@article{Colson2026,
  author = {Colson, Joren and Willems, Thijs and WANG, Yonggang and Kirchner, Matteo and Naets, Frank},
  title = {Vision-based Modal Analysis using Local Phase Information},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33761}
}
Kostenlos starten →