Physics-Informed Prognostics for Mixed-Mode Fatigue Crack Growth in Curved Composites using Ultrasonic Guided Waves
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/33743 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Javier Hernandez-olivan und 5 weiteren Autor:innen.
Abstract (Originalsprache)
This work addresses a critical challenge for the implementation of Structural Health Monitoring (SHM) systems in the aerospace sector: the validation of Ultrasonic Guided Wave (UGW) models in curved geometries and under real conditions of fatigue crack growth. The geometric complexity of curved aeronautical composites generates dispersion, attenuation, and mode conversion that complicates UGW signal interpretation. While UGW monitoring is well-established for flat composites and fatigue damage is more commonly tracked via Acoustic Emission (AE), validated models for mixed-mode fatigue delamination in curved components remain scarce. The main objective is to validate a 2D Finite Element Model (FE) developed at Abaqus to simulate the precise interaction between guided waves (A0 and S0 modes) and a Mixed-Mode fatigue delamination in two curved specimens of different materials and thicknesses. A co-simulation model was implemented to replicate the Round-Robin tests with Macro Fiber Composite (MFC) transducers, in which crack propagation was experimentally monitored using UGW through two bonded MFC piezoelectric sensors acting as both actuators and receivers, while a 15 mm PTFE film was inserted during manufacturing to ensure crack growth in a single delamination plane. The delamination simulation was carried out by progressively releasing the nodes of the set of contact nodes between the upper and lower surfaces of the delamination, resulting in a free surface, replicating the Severity and Location of the Damage (SoD and LoD) observed experimentally. Numerical-experimental validation focused on comparing the trends of the same key signal features extracted from the experimental campaign and the FE simulations as the material was damaged. The results confirm a high correlation in the features, demonstrating that the FE model successfully captures the effect of delamination growth and wave-curvature interaction. Finally, this validated model is proposed as the ideal training environment for a Leave-One-Group-Out Cross Validation (LOGO-CV) scheme for material generalization, demonstrating robustness to manufacturing variations.
Zitieren
APA
Hernandez-olivan, J., Mallor, C., Royo, J. M., Calvo-Echenique, A., Sánchez, M., & Calvo, S. (2026). Physics-Informed Prognostics for Mixed-Mode Fatigue Crack Growth in Curved Composites using Ultrasonic Guided Waves. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33743
Vancouver
Hernandez-olivan J, Mallor C, Royo JM, Calvo-Echenique A, Sánchez M, Calvo S. Physics-Informed Prognostics for Mixed-Mode Fatigue Crack Growth in Curved Composites using Ultrasonic Guided Waves. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33743
BibTeX
@article{Hernandezolivan2026,
author = {Hernandez-olivan, Javier and Mallor, Carlos and Royo, José Manuel and Calvo-Echenique, Andrea and Sánchez, Mario and Calvo, Susana},
title = {Physics-Informed Prognostics for Mixed-Mode Fatigue Crack Growth in Curved Composites using Ultrasonic Guided Waves},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/33743}
}
EUVIMED