Crack monitoring using an installed phased array and coded excitation
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/33694 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Frederic Cegla und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Traditional phased array controllers are bulky and expensive meaning they cannot be used for SHM applications where equipment needs to be left in place for regular measurements to be made. Much of the size and cost associated with traditional array controllers arises due to the electronics architecture used for the transmission signals and receiver amplification. Removing these components is not possible when traditional excitation techniques are used. Similarly, high-voltage transmit signals are not easily switched, making channel multiplexing for the purpose of cost-reduction complicated. Conversely, coded excitation techniques can enable the construction of miniature, low-power acquisition systems that are light-weight and low-cost. This is possible due to the use of long-sequence based transmit signals that enable transmission energy to be spread over time, making low-voltage excitations capable of producing high-quality signals following appropriate processing. Furthermore, low voltage transmit signals are easily switched, which enables additional system simplification via multiplexing. Devices using this code-based architecture are therefore well suited to SHM as they can be installed in place on structures to monitor cracks online. A phased array monitoring system was built using an acquisition module designed around using coded excitation – a CA1-MUX32 from CodeAcq. This system uses
Zitieren
APA
Cegla, F., & Challinor, C. (2026). Crack monitoring using an installed phased array and coded excitation. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33694
Vancouver
Cegla F, Challinor C. Crack monitoring using an installed phased array and coded excitation. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33694
BibTeX
@article{Cegla2026,
author = {Cegla, Frederic and Challinor, Connor},
title = {Crack monitoring using an installed phased array and coded excitation},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/33694}
}
EUVIMED