EUVIMEDEUVIMED entdecken
Crossref

Baseline-free, temperature insensitive SHM of plate structures employing mode-converted guided ultrasonic waves

Lijian Li, Paul Fromme

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33670 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Lijian Li und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A common damage mechanism in aluminum aircraft structures is the development of fatigue cracks at locations with stress concentration, such as fastener holes. Detection at an early stage, ideally before they have grown to through-thickness cracks, is important for aircraft safety. Low frequency guided waves that can propagate long distances along thin components allow for the efficient structural health monitoring (SHM) of large structures such as aircraft wings and fuselage. SHM systems employing distributed guided ultrasonic waves sensors, typically piezoelectric transducers, have been investigated and shown promising sensitivity for efficient monitoring. However, limitations due to the typically employed baseline subtraction method have been reported, as environmental influences, e.g., temperature, can influence the wave propagation characteristics and thus accuracy of the baseline subtraction. Baseline-free SHM methodology has been proposed to overcome some of the limitations caused by environmental factors and to improve the sensitivity and temperature stability. This contribution investigates specifically the use of mode conversion of the fundamental guided wave modes at part-thickness defects. 3D FE simulations were used to predict the mode conversion of the fundamental guided wave modes for a variation of the defect size. Accurate experimental validation of the FE predictions was achieved. A baseline-free SHM algorithm was developed, employing the mode-conversion from the S0 to the A0 guided wave mode with a difference of arrival time algorithm. This enabled the accurate localization of damage in a plate with a good agreement between FE simulations and experimental validation. The influence of the excitation and monitoring location layout on the localization accuracy was investigated from FE simulations. From experiments and FE simulations it was demonstrated that the baseline-free SHM worked independent of temperature effects and could accurately localize a part-thickness damage across significant temperature changes.

Zitieren

APA

Li, L., & Fromme, P. (2026). Baseline-free, temperature insensitive SHM of plate structures employing mode-converted guided ultrasonic waves. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33670

Vancouver

Li L, Fromme P. Baseline-free, temperature insensitive SHM of plate structures employing mode-converted guided ultrasonic waves. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33670

BibTeX
@article{Li2026,
  author = {Li, Lijian and Fromme, Paul},
  title = {Baseline-free, temperature insensitive SHM of plate structures employing mode-converted guided ultrasonic waves},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33670}
}
Kostenlos starten →