Fitting a Random Coefficient Autoregressive Model to Sensor Data
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/33661 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Carina Beering.
Abstract (Originalsprache)
As sensor data is collected over time, the data points form a time series, where each point is influenced by its past to some extent. Many models to describe the time series rely on fixed coefficients. As a result, the influence of the past is always the same. However, reality tells a different story. There would be no need for weather forecasts if temperatures followed a determined series. Moreover, man-made phenomena like traffic varies over time. Weekends and workdays, holidays and school vacations, they all have an influence on the volume of traffic and are not entirely predetermined. Varying the regression coefficient by adding a random effect to it provides a solution to this issue. A popular model for that is the so-called Random Coefficient Autoregressive Model by Nicholls and Quinn (1982). Inspired by financial mathematics, we show how to determine the model coefficients for an engineering equivalent of log-returns via the quasi-maximum-likelihood method proposed by Aue et al. (2006) using the example of a crack width on a concrete bridge in Bochum, Germany. The data was collected during the project SFB 823, B5 of the German Research Foundation with the help of inductive displacement sensors. Since the bridge was fully operating during the monitoring, environmental factors such as temperature, humidity and wind as well as operational factors like traffic influenced the cracks. Sensor-induced variability can already be successfully subtracted out as shown by Heinrich et al. (2021), leaving us to deal with uncertainty coming from outside. The quasi-maximum-likelihood method relies on minimal assumptions regarding the noise process, making it suitable for a broad spectrum of applications. Additionally, we simulate alternative paths of the time series formed by the crack width based on the estimated parameters to illustrate their validity. These simulations, in turn, serve as a starting point for further evaluation and prediction using risk measures also known from finance. They are applied solely to the time series without the need to incorporate influential factors explicitly. All in all, this approach allows us to take influences into account without having to know the exact nature or characteristics of these influences beforehand.
Zitieren
APA
Beering, C. (2026). Fitting a Random Coefficient Autoregressive Model to Sensor Data. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33661
Vancouver
Beering C. Fitting a Random Coefficient Autoregressive Model to Sensor Data. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33661
BibTeX
@article{Beering2026,
author = {Beering, Carina},
title = {Fitting a Random Coefficient Autoregressive Model to Sensor Data},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/33661}
}
EUVIMED