A general methodology for the identification of invariant features in Eddy Current Testing
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33521 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Vincenzo Mottola und 5 weiteren Autor:innen.
Abstract (Originalsprache)
Eddy Current Testing (ECT) is an appealing technique for the non-destructive evaluation of metallic components, as it combines low operational costs with real-time sensing capabilities, aligning well with the requirements of Industry 4.0. The measured ECT signal, typically the impedance of a sensing coil, is influenced by several factors, including the electromagnetic and geometrical properties of the specimen, the probe’s lift-off, and the probe’s own geometry. In practice, only a small subset of these parameters is of actual interest, while the others behave as nuisance parameters, i.e. quantities that are difficult to control and may be unknown or vary during measurement. However, an accurate knowledge of these nuisance parameters is essential, as they strongly affect the measured signal and, consequently, the accuracy of reconstruction algorithms. To address this issue, invariant transformations have been proposed in the literature, aiming to make the measured data insensitive to nuisance parameters through suitable mathematical manipulations or by identifying appropriate operating conditions. The present contribution extends the class of invariant transformations for ECT. In particular, building on dimensional analysis, a general methodology for identifying features that are invariant with respect to nuisance parameters is introduced, thereby enabling the development of robust, real-time invariant methods.
Zitieren
APA
Mottola, V., Sardellitti, A., Milano, F., Ferrigno, L., Laracca, M., & Tamburrino, A. (2026). A general methodology for the identification of invariant features in Eddy Current Testing. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33521
Vancouver
Mottola V, Sardellitti A, Milano F, Ferrigno L, Laracca M, Tamburrino A. A general methodology for the identification of invariant features in Eddy Current Testing. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33521
BibTeX
@article{Mottola2026,
author = {Mottola, Vincenzo and Sardellitti, Alessandro and Milano, Filippo and Ferrigno, Luigi and Laracca, Marco and Tamburrino, Antonello},
title = {A general methodology for the identification of invariant features in Eddy Current Testing},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33521}
}
EUVIMED