EUVIMEDEUVIMED entdecken
Crossref

Ultrasonic Probe Mimicking Technique and its Application to Porosity Measurement in Composite Materials

Julien Walter, Alexandre Beausoleil, Olivier Arès

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33489 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Julien Walter und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrasonic methods used for porosity assessment in composite materials generally rely on indirect measurements. The effect of porosity on selected ultrasonic signal features, such as echoes amplitudes or spectral contents, is measured and correlated with volumetric porosity using reference curves established from samples with known porosity levels. However, these methods typically do not account for the intrinsic acoustic differences between the probe used to generate the reference curve, and the probe used for inspection, which can ultimately bias porosity estimation. This paper proposes a probe-mimicking approach aimed at compensating for probe-to-probe variability, along with two implementation strategies based on a compensation filter obtained from experimental characterizations of the reference and test probes. The first strategy applies the filter directly at transmission by modifying the electrical excitation using arbitrary waveform generation (AWG), while the second applies the filter to the received signal in post-processing. The method was evaluated on aerospace-grade composite panels with and without porosity and demonstrates that probe-induced errors can be effectively compensated.

Zitieren

APA

Walter, J., Beausoleil, A., & Arès, O. (2026). Ultrasonic Probe Mimicking Technique and its Application to Porosity Measurement in Composite Materials. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33489

Vancouver

Walter J, Beausoleil A, Arès O. Ultrasonic Probe Mimicking Technique and its Application to Porosity Measurement in Composite Materials. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33489

BibTeX
@article{Walter2026,
  author = {Walter, Julien and Beausoleil, Alexandre and Arès, Olivier},
  title = {Ultrasonic Probe Mimicking Technique and its Application to Porosity Measurement in Composite Materials},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33489}
}
Kostenlos starten →