EUVIMEDEUVIMED entdecken
Crossref

Ultrasonic Velocity–Based Non-Destructive Characterization of Heat-Treated Additively Manufactured 18Ni300 Maraging Steel

Ibrahim Aydin, C. Hakan Gür

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33373 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Ibrahim Aydin und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additively manufactured maraging steels are increasingly used in aerospace and high-performance engineering applications due to their excellent strength–toughness balance and geometric flexibility. However, the rapid solidification associated with selective laser melting (SLM) results in complex microstructures and anisotropic mechanical behavior, which necessitate optimized post-processing heat treatments. In parallel, there is a growing need for reliable non-destructive techniques to monitor variations in microstructural and mechanical properties induced by these treatments. In this study, ultrasonic wave velocity measurements are evaluated as a non-destructive characterization tool for SLM-produced 18Ni300 maraging steel subjected to solution and aging heat treatments. Microstructural evolution was examined using optical microscopy, scanning electron microscopy, and X-ray diffraction, while mechanical properties were determined through hardness and tensile testing. Longitudinal and transverse ultrasonic wave velocities were measured using the time-of-flight method, and elastic constants were calculated accordingly. The results show that aging treatment leads to significant precipitation hardening, with hardness increasing from approximately 370 HV in the as-built condition to about 610 HV, accompanied by a substantial increase in tensile strength and a reduction in ductility. These changes are consistently reflected in ultrasonic wave velocity measurements.

Zitieren

APA

Aydin, I., & Gür, C. H. (2026). Ultrasonic Velocity–Based Non-Destructive Characterization of Heat-Treated Additively Manufactured 18Ni300 Maraging Steel. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33373

Vancouver

Aydin I, Gür CH. Ultrasonic Velocity–Based Non-Destructive Characterization of Heat-Treated Additively Manufactured 18Ni300 Maraging Steel. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33373

BibTeX
@article{Aydin2026,
  author = {Aydin, Ibrahim and Gür, C. Hakan},
  title = {Ultrasonic Velocity–Based Non-Destructive Characterization of Heat-Treated Additively Manufactured 18Ni300 Maraging Steel},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33373}
}
Kostenlos starten →