EUVIMEDEUVIMED entdecken
Crossref

An Innovative ECT method for Advanced Corrosion Detection and Characterization

Alessandro Sardellitti, Marco Laracca, Angelo D aguanno, Vincenzo Mottola, Filippo Milano, Luigi Ferrigno, Antonello Tamburrino

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33260 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Alessandro Sardellitti und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Corrosion represents a major threat in industrial infrastructures, requiring reliable NonDestructive Testing (NDT) solutions for early detection and characterization. This work presents an advanced Eddy Current Testing (ECT) methodology for superficial, hidden, and under-insulation corrosion in ferromagnetic components. Unlike conventional air-core or standard ferrite-based probes, the proposed approach employs a pot-cored configuration combined with magnetic-flux sensing and finite-element-driven probe comparison. Numerical simulations performed at 10 Hz demonstrate that the pot-cored structure achieves induced eddy current densities up to 1.26 × 10⁻¹² A/m² and magnetic flux density values up to 36.2 mT, providing more than one order of magnitude enhancement compared to conventional configurations. Experimental investigations were conducted in the 10–2000 Hz frequency range on S275 steel samples exposed to marine atmospheric ageing from 1 to 12 months, corresponding to corrosion thicknesses between 43.06 and 158.12 μm. The proposed probe enables clear separation of corrosion states for superficial and under-insulation conditions, with repeatable trends following a power-law behavior (R² up to 0.996). Hidden corrosion was successfully detected in the 10–100 Hz range. The results confirm the superior sensitivity and metrological robustness of the proposed ECT strategy for advanced corrosion assessment.

Zitieren

APA

Sardellitti, A., Laracca, M., aguanno, A. D., Mottola, V., Milano, F., Ferrigno, L., & Tamburrino, A. (2026). An Innovative ECT method for Advanced Corrosion Detection and Characterization. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33260

Vancouver

Sardellitti A, Laracca M, aguanno AD, Mottola V, Milano F, Ferrigno L, et al. An Innovative ECT method for Advanced Corrosion Detection and Characterization. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33260

BibTeX
@article{Sardellitti2026,
  author = {Sardellitti, Alessandro and Laracca, Marco and aguanno, Angelo D and Mottola, Vincenzo and Milano, Filippo and Ferrigno, Luigi and Tamburrino, Antonello},
  title = {An Innovative ECT method for Advanced Corrosion Detection and Characterization},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33260}
}
Kostenlos starten →