Local Resistance Evaluation of Printed Electronics During Jet-Dispensing and IR-Sintering Using Eddy Current and Laser Profilometry with Temperature and Lift-Off Compensation
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33180 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Nataliia Gromberg und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Printed electronics is a rapidly growing branch of electronics manufacturing, offering versatile methods for creating functional structures such as conductive paths, sensors, antennas, and heating elements on 2D and 3D components. Jet dispensing plays a key role by enabling precise deposition of conductive pastes or inks, while selective IR-spot sintering provides an alternative to conventional furnace-based processes, reducing size and energy constraints [1]. However, during printing and sintering, defects such as interruptions, cross-sectional variations, or insufficient sintering can occur, significantly affecting electrical performance and reliability. To ensure quality, a non-destructive testing approach combining high frequency eddy current inspection [2] and laser profilometry is proposed. This method enables simultaneous detection of structural and functional defects. Furthermore, compensation strategies for temperature effects (using pyrometry) and lift-off variations (caused by geometry changes or machine vibrations) are integrated to improve measurement accuracy [3]. The presented approach supports in-line monitoring during production, enhancing process control and reliability of printed electronic components.
Zitieren
APA
Gromberg, N., Boxberger, L., Schulze, T., Heuer, H., & Drossel, W. (2026). Local Resistance Evaluation of Printed Electronics During Jet-Dispensing and IR-Sintering Using Eddy Current and Laser Profilometry with Temperature and Lift-Off Compensation. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33180
Vancouver
Gromberg N, Boxberger L, Schulze T, Heuer H, Drossel W. Local Resistance Evaluation of Printed Electronics During Jet-Dispensing and IR-Sintering Using Eddy Current and Laser Profilometry with Temperature and Lift-Off Compensation. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33180
BibTeX
@article{Gromberg2026,
author = {Gromberg, Nataliia and Boxberger, Lukas and Schulze, Till and Heuer, Henning and Drossel, Welf-Guntram},
title = {Local Resistance Evaluation of Printed Electronics During Jet-Dispensing and IR-Sintering Using Eddy Current and Laser Profilometry with Temperature and Lift-Off Compensation},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33180}
}
EUVIMED