Assessment of Through-Transmission Eddy Currents for Subsurface Crack Detection
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33160 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Catalin Mandache und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Unlike ultrasonic testing, the eddy current technique is rarely performed in a through-transmission configuration. This work proposes using a thin and flexible printed circuit board coil, placed at the far side of a metallic test piece or embedded in a multi-layer structure, as the transmitter while a passive induction coil or a Hall sensor scans the surface of the part, as the receiver. This through-transmission setup improves the detectability of subsurface cracks, as well as increases depth of penetration compared to single-sided eddy current inspections. Numerical simulations complement the experimental work by helping select experimental design parameters and by clarifying certain limitations of the technique.
Zitieren
APA
Mandache, C., Dionne, L., & Prigli, A. (2026). Assessment of Through-Transmission Eddy Currents for Subsurface Crack Detection. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33160
Vancouver
Mandache C, Dionne L, Prigli A. Assessment of Through-Transmission Eddy Currents for Subsurface Crack Detection. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33160
BibTeX
@article{Mandache2026,
author = {Mandache, Catalin and Dionne, Leo and Prigli, Antal},
title = {Assessment of Through-Transmission Eddy Currents for Subsurface Crack Detection},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33160}
}
EUVIMED