Robotic CT for Quality Assurance of Arbitrary Test Objects in an NDE 4.0 Smart Factory Environment
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33109 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Frank Herold und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Nondestructive evaluation (NDE) 4.0 is essential for smart factories that must fulfill quality assurance requirements for their manufactured products with minimal or no human interaction. Computed tomography (CT) is the established reference method for NDE when the internal details of a test object need to be visualized or measured. However, classic CT manipulators consisting of two orthogonal linear axes, a turntable, and a lifting axis are difficult or impossible to use for very large or complex test objects where only specific regions of interest (ROIs) are examined and special trajectories are needed. Robotic CT using industrial robots has not yet been widely adopted due to the comparatively lower repeatability of ±20 µm or worse and imprecise absolute positioning in the millimeter range, both of which are worse than classic manipulators. This study demonstrates how to overcome these disadvantages and utilize the robots' highly flexible spatial positioning to fully automate the CT scanning of arbitrary test objects without user interaction. The study demonstrates how this can be achieved by optimizing scan parameters and employing digital protocols such as OPC UA and DICONDE.
Zitieren
APA
Herold, F., & Kühne, J. (2026). Robotic CT for Quality Assurance of Arbitrary Test Objects in an NDE 4.0 Smart Factory Environment. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33109
Vancouver
Herold F, Kühne J. Robotic CT for Quality Assurance of Arbitrary Test Objects in an NDE 4.0 Smart Factory Environment. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33109
BibTeX
@article{Herold2026,
author = {Herold, Frank and Kühne, Jonas},
title = {Robotic CT for Quality Assurance of Arbitrary Test Objects in an NDE 4.0 Smart Factory Environment},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33109}
}
EUVIMED