Challenges for automated ultrasonic testing of forged parts with immersion technique
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33105 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Thomas Rehfeldt und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Forged parts for large components such as turbines are typically heavy, curved and have high tolerances in the early manufacturing stage. In addition, there are high requirements for flaw detection. These challenging characteristics must be considered when developing an automated ultrasonic testing system for reliable inspection. As a solution to such challenging requirements, a UT system for automated inspection of flywheels for gas turbines is presented. Major aspects for the design the inspection system are positioning of the heavy parts, interaction between mechanical control and ultrasonics, and the specific requirements for the ultrasonic system and its settings. Immersion technique has major advantages regarding compensation for uneven surfaces and full coverage of the inspection volume. It requires high positioning accuracy to maintain the distance between probe and surface. Positioning takes place in four steps: feeding the part into the system with a crane, initial positioning using the mechanics of the system, verification with straight beam UT probe, and fine correction by the mechanics. To eliminate small inaccuracies, the system must correct itself using feedback from UT. The ultrasonic technique and optimized UT settings safely master the long beam paths and its side effects such as phantom echoes.
Zitieren
APA
Rehfeldt, T., Köck, A., Weber, A., Motschiedler, S., & Bargsten, J. (2026). Challenges for automated ultrasonic testing of forged parts with immersion technique. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33105
Vancouver
Rehfeldt T, Köck A, Weber A, Motschiedler S, Bargsten J. Challenges for automated ultrasonic testing of forged parts with immersion technique. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33105
BibTeX
@article{Rehfeldt2026,
author = {Rehfeldt, Thomas and Köck, Alexander and Weber, Andreas and Motschiedler, Sandra and Bargsten, Jeanne},
title = {Challenges for automated ultrasonic testing of forged parts with immersion technique},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33105}
}
EUVIMED