EUVIMEDEUVIMED entdecken
Crossref

Signal Processing using Synthetic Aperture Focusing Technique for Ultrasonic Tesing of Round Bars

Kazuki Terada, Yutaka Matsui

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Kazuki Terada und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In steel round bars, inclusions sometimes exist due to mold powder entrainment and reoxidation of molten steel components. Such inclusions may reduce mechanical strength of the final product or cause a crack in the downstream process. Therefore, internal defects such as inclusions are inspected by the ultrasonic flaw detection method. It is also necessary to improve the detection sensitivity to detect smaller defects. Synthetic aperture focusing technique (SAFT) is one of the methods for improving the detectability of single-probe ultrasonic testing. However, when applying SAFT to an automatic ultrasonic testing (AUT) system operated under multiple inspecting conditions, there were two problems. One is that the synthetic width needs to be determined experimentally or empirically and the other is that appropriate synthetic width is different according to inspecting depths and conditions. Therefore, the new method was developed which determines an appropriate synthetic width based on the directivity of the ultrasonic probe and the inspecting condition. By this method, the detectability is improved and smaller defects can be detected by single-probe ultrasonic testing.

Zitieren

APA

Terada, K., & Matsui, Y. (2026). Signal Processing using Synthetic Aperture Focusing Technique for Ultrasonic Tesing of Round Bars. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33029

Vancouver

Terada K, Matsui Y. Signal Processing using Synthetic Aperture Focusing Technique for Ultrasonic Tesing of Round Bars. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33029

BibTeX
@article{Terada2026,
  author = {Terada, Kazuki and Matsui, Yutaka},
  title = {Signal Processing using Synthetic Aperture Focusing Technique for Ultrasonic Tesing of Round Bars},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33029}
}
Kostenlos starten →