Active Infrared Thermography for the inspection of thermoplastic composite welds
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33017 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Daniella B. Deutz und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Thermoplastic composites offer promising solutions for eco-efficient propulsion techniques based on H2 integration into aircraft fuselage architecture. Greater confidence in being able to inspect thermoplastic welded joints is key to a greater uptake of these materials. This study leverages active Infrared Thermography (IRT) to detect manufacturing defects in specimens simulating thermoplastic composite fuselage skin. Large area (>1m2) specimens with welds up to 4.5 mm thick, were manufactured with defects via four welding techniques and inspected with IRT. Results are compared to (phased array) ultrasound inspections ((PA)UT). Defect detection with IRT is promising. Indications of size 100 mm^2 and larger are identified at the same location in IRT and (PA)UT, while sizing indications with IRT is inaccurate and strongly dependent on the chosen sound area reference. Signal-to-noise ratios of the identified defects in IRT inspections are >3, irrespective of the welding technique. Due to the non-contact nature of IRT these inspections outpace (PA)UT in speed, enabling large-area scanning in a single shot. This efficiency gain, achieved by targeting PAUT inspections only on areas identified by IRT, could remove one roadblock for the adoption of thermoplastic composites in large-scale aerospace applications, contributing to more sustainable H2-based propulsion systems and reduce inspection times.
Zitieren
APA
Deutz, D. B., & Jansen, H. P. (2026). Active Infrared Thermography for the inspection of thermoplastic composite welds. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33017
Vancouver
Deutz DB, Jansen HP. Active Infrared Thermography for the inspection of thermoplastic composite welds. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33017
BibTeX
@article{Deutz2026,
author = {Deutz, Daniella B. and Jansen, H. Patrick},
title = {Active Infrared Thermography for the inspection of thermoplastic composite welds},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33017}
}
EUVIMED