EUVIMEDEUVIMED entdecken
Crossref

Improved process control of high-strength steels by microstructure monitoring with an inline XRD gauge

Frenk Van Den Berg, Ramon Speets, Cor Jan Boeder, Cornelia Ionescu, Martin Huisert, Suzan Bruinsma, S Melzer, Horst Krauthäuser, Tobias Terlau

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/32994 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Frenk Van Den Berg und 8 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The steel industry continuously strives to supply products with superior quality to their customers. Especially in mobility applications, use of advanced high-strength steels (AHSS) allows mass reduction of vehicles, needed to achieve reductions in energy consumption and carbon emissions during their lifetime. Accurate control of the secondary hard phase fraction in AHSS is key to manufacture steel with homogeneous properties over strip length and across sequential steel coils. Traditionally, the process control for steel strip is based on temperature control. With the installation in 2023 of an inline XRD measurement installed in the anneal section of the production line of Tata Steel in the Netherlands, real-time data has become available on the austenite fraction being transformed into the secondary hard phases. These data are nowadays used in a control loop, providing a more uniform and consistent product quality, which has led to reduction in internal rejections.

Zitieren

APA

Berg, F. V. D., Speets, R., Boeder, C. J., Ionescu, C., Huisert, M., Bruinsma, S., Melzer, S., Krauthäuser, H., & Terlau, T. (2026). Improved process control of high-strength steels by microstructure monitoring with an inline XRD gauge. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/32994

Vancouver

Berg FVD, Speets R, Boeder CJ, Ionescu C, Huisert M, Bruinsma S, et al. Improved process control of high-strength steels by microstructure monitoring with an inline XRD gauge. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/32994

BibTeX
@article{Berg2026,
  author = {Berg, Frenk Van Den and Speets, Ramon and Boeder, Cor Jan and Ionescu, Cornelia and Huisert, Martin and Bruinsma, Suzan and Melzer, S and Krauthäuser, Horst and Terlau, Tobias},
  title = {Improved process control of high-strength steels by microstructure monitoring with an inline XRD gauge},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/32994}
}
Kostenlos starten →