EUVIMEDEUVIMED entdecken
Crossref

Fast Non-Destructive Inspection of Curved Components using Laser Ultrasonic Testing

William Kramer, Benjamin Van Elburg, H. Patrick Jansen

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/32989 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von William Kramer und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser Ultrasonic Testing (LUT) can offer fast contactless non-destructive testing (NDT) to meet the growing demand for quality assurance of increasingly complex carbon fibre reinforced polymer (CFRP) composite parts in the aircraft industry. Whereas traditional ultrasonic systems need alignment of the transducer with respect to the component’s surface accurate within 0.5 degrees, LUT can scan at angles of incidence of 10 degrees or higher, depending on the material surface. The signal to noise ratio (SNR) decreases steeply only beyond this angle. This enables LUT to scan large areas of curved components without realignment. However, many components have a curvature that is larger than 10 degrees. This study describes an integrated system consisting of a LUT system, a rotation table and a 3D structured light scanner that addresses this challenge. The combined system acquires a 3D model of a curved component, and then obtains the internal structure using LUT from multiple angles such that the whole surface is scanned within the angle tolerance, all in one automated measurement procedure. This is demonstrated on two curved CFRP components. The system’s speed and flexibility make it an attractive solution for industrial applications where rapid and flexible inspections are critical.

Zitieren

APA

Kramer, W., Elburg, B. V., & Jansen, H. P. (2026). Fast Non-Destructive Inspection of Curved Components using Laser Ultrasonic Testing. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/32989

Vancouver

Kramer W, Elburg BV, Jansen HP. Fast Non-Destructive Inspection of Curved Components using Laser Ultrasonic Testing. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/32989

BibTeX
@article{Kramer2026,
  author = {Kramer, William and Elburg, Benjamin Van and Jansen, H. Patrick},
  title = {Fast Non-Destructive Inspection of Curved Components using Laser Ultrasonic Testing},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/32989}
}
Kostenlos starten →