EUVIMEDEUVIMED entdecken
Crossref

Development of a Modular Eddy Current NDT System for Conductive Materials

Manel Bensaad, Ikhlass Benrabah, Abdelhalim Taieb brahimi

Research and Review Journal of Nondestructive Testing · 2025-09 · 3

DOI: 10.58286/31632 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Research and Review Journal of Nondestructive Testing, 2025-09. Verfasst von Manel Bensaad und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the design, modeling, and experimental validation of a non-destructive testing (NDT) system based on Eddy Current Testing (ECT) for the inspection of various conductive structures, including hollow tubes, flat plates, and complex geometries. The system integrates a motor-driven mechanical platform, a customfabricated eddy current probe, and real-time impedance measurement using an LCR meter. Its modular architecture allows the adjustment of the probe and motion configuration depending on the specimen under test. Finite Element Method (FEM) simulations were conducted using FEMM to model electromagnetic behavior and evaluate defect detectability.

Zitieren

APA

Bensaad, M., Benrabah, I., & brahimi, A. T. (2025). Development of a Modular Eddy Current NDT System for Conductive Materials. Research and Review Journal of Nondestructive Testing, 3. https://doi.org/10.58286/31632

Vancouver

Bensaad M, Benrabah I, brahimi AT. Development of a Modular Eddy Current NDT System for Conductive Materials. Research and Review Journal of Nondestructive Testing. 2025;3. doi:10.58286/31632

BibTeX
@article{Bensaad2025,
  author = {Bensaad, Manel and Benrabah, Ikhlass and brahimi, Abdelhalim Taieb},
  title = {Development of a Modular Eddy Current NDT System for Conductive Materials},
  journal = {Research and Review Journal of Nondestructive Testing},
  year = {2025},
  volume = {3},
  doi = {10.58286/31632}
}
Kostenlos starten →