EUVIMEDEUVIMED entdecken
Crossref

Analisis Ketidakpastian Pengukuran Dimensi Roda Gigi Lurus dengan Alat Ukur Profile Projector

Ulikaryani Ulikaryani, Hamid Abdillah, Hety Dwi Hastuti

Jurnal Universal Technic · 2022

DOI: 10.58192/unitech.v1i1.20 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Universal Technic, 2022. Verfasst von Ulikaryani Ulikaryani und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An analysis of the uncertainty value of measuring spur gear dimensions using a profile projector has been carried out. Dimensions of spur gears measured are pitch diameter, root diameter and outside diameter. The manufacture of 3 samples of spur gears was first made with a shape milling machine based on the initial technical data that had been determined. Then measurements were made with a profile projector measuring instrument for the three measuring dimensions, the best repeated measurement average was found in the root diameter measurement for the PJ01 sample of 32.4053 mm with a standard deviation of 0.0077 mm. The uncertainty method used is statistically and applies only to a series of observations. Determination of the uncertainty value is done by performing repeated measurements five times on the same sample. This method refers to ISO GUM with type A evaluation. The uncertainty value obtained for the best measurement is 0.0034 mm with an expanded uncertainty of 0.0068 mm with a 95% confidence level.

Zitieren

APA

Ulikaryani, U., Abdillah, H., & Hastuti, H. D. (2022). Analisis Ketidakpastian Pengukuran Dimensi Roda Gigi Lurus dengan Alat Ukur Profile Projector. Jurnal Universal Technic. https://doi.org/10.58192/unitech.v1i1.20

Vancouver

Ulikaryani U, Abdillah H, Hastuti HD. Analisis Ketidakpastian Pengukuran Dimensi Roda Gigi Lurus dengan Alat Ukur Profile Projector. Jurnal Universal Technic. 2022. doi:10.58192/unitech.v1i1.20

BibTeX
@article{Ulikaryani2022,
  author = {Ulikaryani, Ulikaryani and Abdillah, Hamid and Hastuti, Hety Dwi},
  title = {Analisis Ketidakpastian Pengukuran Dimensi Roda Gigi Lurus dengan Alat Ukur Profile Projector},
  journal = {Jurnal Universal Technic},
  year = {2022},
  doi = {10.58192/unitech.v1i1.20}
}
Kostenlos starten →