EUVIMEDEUVIMED entdecken
Crossref

A simple method for the determination of sensitivity to density changes in sand liquefaction

Bozana Bacic, Ivo Herle

Open Geomechanics · 2020

DOI: 10.5802/ogeo.6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Open Geomechanics, 2020. Verfasst von Bozana Bacic und 1 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 31 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fully saturated loose coarse-grained soils are known to be prone to liquefaction. Conventional laboratory tests for soil liquefaction include usually cyclic testing in triaxial apparatus. However, such investigations are complicated and time-consuming. The objective of the outlined work is to evaluate the sensitivity of different sands to density change with respect to liquefaction using a relatively simple method. This method enables a fast setup of the tested specimen and a subsequent investigation of the pore water pressure build-up during cyclic shearing within a short time. The results have confirmed a good repeatability of the new method as well as an expected dependence of the pore pressure build-up on initial density. Validation of the method was performed using the results of cyclic triaxial tests. A good agreement between both methods was observed regarding the rate of the pore pressure increase with initial density. Furthermore, it was shown that the initial fabric of soil has a larger impact on the pore pressure build-up during cyclic loading than the relative density.

Zitieren

APA

Bacic, B., & Herle, I. (2020). A simple method for the determination of sensitivity to density changes in sand liquefaction. Open Geomechanics. https://doi.org/10.5802/ogeo.6

Vancouver

Bacic B, Herle I. A simple method for the determination of sensitivity to density changes in sand liquefaction. Open Geomechanics. 2020. doi:10.5802/ogeo.6

BibTeX
@article{Bacic2020,
  author = {Bacic, Bozana and Herle, Ivo},
  title = {A simple method for the determination of sensitivity to density changes in sand liquefaction},
  journal = {Open Geomechanics},
  year = {2020},
  doi = {10.5802/ogeo.6}
}
Kostenlos starten →