EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parameter Optimization of an Earth Coolant Tube Heat Exchanger Using Mathematical Modeling, MATLAB Simulation, and Experimental Validation under Tropical Climate Conditions

Castor G. Tabangan

Green Energy and Environmental Technology · 30.06.2026 · 5

DOI: 10.5772/geet.20250209 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Green Energy and Environmental Technology, online erschienen am 30.06.2026. Verfasst von Castor G. Tabangan. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The accelerating rise in global temperatures, increasing energy demands, and escalating energy costs highlight the urgent need for sustainable cooling solutions, especially in tropical regions such as the Philippines. This study presents a mathematical modeling approach to optimize the design parameters of an earth coolant tube system. Using MATLAB, a ground temperature model was developed to simulate temperature distribution with depth and identify the depth at which the undisturbed ground temperature (UGT) is located, a critical factor for system performance. A complementary model simulated air temperature along the length of the coolant tube, incorporating UGT as the boundary condition. Statistical validation comparing simulated and experimental data confirmed the models’ accuracy. Results indicate that UGT is achieved beyond a depth of 2,000 mm, where temperature variation becomes minimal, consistent with experimental observations. Optimization simulations suggest that, to maximize the air-cooling effect, the coolant tube should have a minimum diameter of 80 mm, operate at an air velocity not exceeding 30 m/s (or an air mass flow rate of 0.02–0.11 kg/s), and be installed at a depth of at least 2,000 mm or the minimum depth at which UGT conditions occur locally. The achievable temperature reduction is strongly influenced by the local UGT.

Zitieren

APA

Tabangan, C. G. (2026). Parameter Optimization of an Earth Coolant Tube Heat Exchanger Using Mathematical Modeling, MATLAB Simulation, and Experimental Validation under Tropical Climate Conditions. Green Energy and Environmental Technology, 5. https://doi.org/10.5772/geet.20250209

Vancouver

Tabangan CG. Parameter Optimization of an Earth Coolant Tube Heat Exchanger Using Mathematical Modeling, MATLAB Simulation, and Experimental Validation under Tropical Climate Conditions. Green Energy and Environmental Technology. 2026;5. doi:10.5772/geet.20250209

BibTeX
@article{Tabangan2026,
  author = {Tabangan, Castor G.},
  title = {Parameter Optimization of an Earth Coolant Tube Heat Exchanger Using Mathematical Modeling, MATLAB Simulation, and Experimental Validation under Tropical Climate Conditions},
  journal = {Green Energy and Environmental Technology},
  year = {2026},
  volume = {5},
  doi = {10.5772/geet.20250209}
}
Kostenlos starten →