EUVIMEDEUVIMED entdecken
Crossref

Enhancing Mechanical and Corrosion Properties of a Cr₉Fe₄₆Ni₁₅Mn₃₀ Medium-Entropy Alloy through Synergistic Al/Ti Microalloying and Aging

YUANJI SHI, Jianjun LIN, Zicheng LIN, Shebing LI, Min LIU, Jiawei WU, Zimo LI, Yan HU

Materials Science · 23.03.2026

DOI: 10.5755/j02.ms.43602 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science, online erschienen am 23.03.2026. Verfasst von YUANJI SHI und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically investigates the synergistic effects of Al/Ti microalloying and subsequent aging treatment on the microstructure and properties of the Cr₉Fe₄₆Ni₁₅Mn₃₀ high-entropy alloy. The results demonstrate that Al and Ti additions induce pronounced grain refinement, reducing the average grain size from 5.2 μm to 1.52 μm, promote the formation of nanoscale Al/Ti-rich precipitates together with ~0.7 % body-centered cubic (BCC) phase, and decrease the recrystallization fraction to 92.1 %. Subsequent aging at 600 °C further improves microstructural homogeneity, increases the recrystallization fraction to 99.2 %, and reduces the kernel average misorientation (KAM) to 0.07°. Mechanical testing reveals that microalloying enhances the tensile strength to 708 MPa and significantly lowers the hydrogen embrittlement sensitivity index (δH) to 2.6 %. After aging, a pronounced hydrogen-induced plasticity effect is observed, with δH decreasing to −16.8 % and the elongation after hydrogen charging increasing to 29.2 %. In addition, the aged Al/Ti-microalloyed alloy exhibits superior corrosion resistance, characterized by the most positive corrosion potential (−0.279 V), the lowest corrosion current density (6.39 × 10⁻⁷ A·cm⁻²), and the largest capacitive arc radius in electrochemical impedance spectroscopy. These improvements are attributed to the formation of a stable Cr₂O₃ passive film and a reduced defect density.

Zitieren

APA

SHI, Y., LIN, J., LIN, Z., LI, S., LIU, M., WU, J., LI, Z., & HU, Y. (2026). Enhancing Mechanical and Corrosion Properties of a Cr₉Fe₄₆Ni₁₅Mn₃₀ Medium-Entropy Alloy through Synergistic Al/Ti Microalloying and Aging. Materials Science. https://doi.org/10.5755/j02.ms.43602

Vancouver

SHI Y, LIN J, LIN Z, LI S, LIU M, WU J, et al. Enhancing Mechanical and Corrosion Properties of a Cr₉Fe₄₆Ni₁₅Mn₃₀ Medium-Entropy Alloy through Synergistic Al/Ti Microalloying and Aging. Materials Science. 2026. doi:10.5755/j02.ms.43602

BibTeX
@article{SHI2026,
  author = {SHI, YUANJI and LIN, Jianjun and LIN, Zicheng and LI, Shebing and LIU, Min and WU, Jiawei and LI, Zimo and HU, Yan},
  title = {Enhancing Mechanical and Corrosion Properties of a Cr₉Fe₄₆Ni₁₅Mn₃₀ Medium-Entropy Alloy through Synergistic Al/Ti Microalloying and Aging},
  journal = {Materials Science},
  year = {2026},
  doi = {10.5755/j02.ms.43602}
}
Kostenlos starten →