EUVIMEDEUVIMED entdecken
Crossref

Grafting Poly(hydroxyethyl acrylate) Branches onto Polyvinyl Alcohol to Promote its Adhesion and Film Properties

Wei LI, Yue ZHANG, Xun ZHANG, Yifan ZHANG, Xiaolong CHENG, Xuchen TAO

Materials Science · 25.02.2026 · 32 (1) · 57-64

DOI: 10.5755/j02.ms.39632 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science, online erschienen am 25.02.2026. Verfasst von Wei LI und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study was to survey the influence of the grafted poly(hydroxyethyl acrylate) (PHEA) branches on the sizing properties (adhesion and film properties) of PVA1799 to determine if the branches can improve the sizing properties and develop a new PVA-based size (PVA1799-g-PHEA) with a suitable grafting ratio for potential use in polyester/cotton warp sizing. The sizing properties of PVA1799-g-PHEA were estimated compared with PVA1799. The PVA1799-g-PHEA samples with the grafting ratios of 3.53 %, 6.74 %, 7.04 %, and 7.34 % were synthesized through graft polymerization of PVA1799 with different masses of HEA monomers at 40 ℃ using the Fe2+-H2O2 redox system by a dry process. The sample was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and thermogravimetric (TG) analyses. FTIR analysis confirmed the successful incorporation of PHEA branches, SEM analysis pointed out that the surface morphology of PVA1799-g-PHEA and PVA1799 had no obvious difference, and TG analysis revealed that incorporating the PHEA branches promoted the thermal stability of PVA1799. Compared to PVA1799, the PVA1799-g-PHEA exhibited significantly higher bonding forces with polyester/cotton roving and greater film elongation. It also displayed a slight increase in film strength and a reduced film break time when exposed to hot water. This suggests that incorporating PHEA branches can enhance the sizing properties and desizability of PVA1799. These improvements were further enhanced by increasing the grafting ratio. Notably, the PVA1799-g-PHEA with the 7.34 % grafting ratio showed promising potential for sizing polyester/cotton warp yarns.

Zitieren

APA

LI, W., ZHANG, Y., ZHANG, X., ZHANG, Y., CHENG, X., & TAO, X. (2026). Grafting Poly(hydroxyethyl acrylate) Branches onto Polyvinyl Alcohol to Promote its Adhesion and Film Properties. Materials Science, 32(1), 57-64. https://doi.org/10.5755/j02.ms.39632

Vancouver

LI W, ZHANG Y, ZHANG X, ZHANG Y, CHENG X, TAO X. Grafting Poly(hydroxyethyl acrylate) Branches onto Polyvinyl Alcohol to Promote its Adhesion and Film Properties. Materials Science. 2026;32(1):57-64. doi:10.5755/j02.ms.39632

BibTeX
@article{LI2026,
  author = {LI, Wei and ZHANG, Yue and ZHANG, Xun and ZHANG, Yifan and CHENG, Xiaolong and TAO, Xuchen},
  title = {Grafting Poly(hydroxyethyl acrylate) Branches onto Polyvinyl Alcohol to Promote its Adhesion and Film Properties},
  journal = {Materials Science},
  year = {2026},
  volume = {32},
  number = {1},
  pages = {57--64},
  doi = {10.5755/j02.ms.39632}
}
Kostenlos starten →