EUVIMEDEUVIMED entdecken
Crossref

Influence of Plasma Transferred Arc Process Parameters on Structure and Mechanical Properties of Wear Resistive NiCrBSi-WC/Co Coatings

Eitvydas GRUZDYS, Šarūnas MEŠKINIS

Materials Science · 04.07.2011 · 17 (2) · 140-144

DOI: 10.5755/j01.ms.17.2.482 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science, online erschienen am 04.07.2011. Verfasst von Eitvydas GRUZDYS und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Self-fluxing NiCrBSi and related coatings received considerable interest due to their good wear as well as corrosion resistance at moderate and elevated temperatures. Hard tungsten carbide (WC) particles can be included in NiCrBSi for further increase of the coating hardness and abrasive wear resistance. Flame spray technique is widely used for fabrication of NiCrBSi films. However, in such a case, subsequent remelting of the deposited coatings by flame, arc discharge or high power laser beam is necessary. In present study NiCrBSi-WC/Co coatings were formed using plasma transferred arc process. By adjusting plasma parameters, such as current, plasma gas flow, shielding gas flow, a number of coatings were formed on steel substrates. Structure of the coatings was investigated using X-ray diffractometry. Microstructure of cross-sectioned coatings was examined using scanning electron microscopy. Hardness of the coating was evaluated by means of the Vickers hardness tests. Wear tests were also performed on specimens to determine resistance to abrasive wear. Acquired results allowed estimating the influence of the deposition process parameters on structure and mechanical properties of the coatings.http://dx.doi.org/10.5755/j01.ms.17.2.482

Zitieren

APA

GRUZDYS, E., & MEŠKINIS, Š. (2011). Influence of Plasma Transferred Arc Process Parameters on Structure and Mechanical Properties of Wear Resistive NiCrBSi-WC/Co Coatings. Materials Science, 17(2), 140-144. https://doi.org/10.5755/j01.ms.17.2.482

Vancouver

GRUZDYS E, MEŠKINIS Š. Influence of Plasma Transferred Arc Process Parameters on Structure and Mechanical Properties of Wear Resistive NiCrBSi-WC/Co Coatings. Materials Science. 2011;17(2):140-144. doi:10.5755/j01.ms.17.2.482

BibTeX
@article{GRUZDYS2011,
  author = {GRUZDYS, Eitvydas and MEŠKINIS, Šarūnas},
  title = {Influence of Plasma Transferred Arc Process Parameters on Structure and Mechanical Properties of Wear Resistive NiCrBSi-WC/Co Coatings},
  journal = {Materials Science},
  year = {2011},
  volume = {17},
  number = {2},
  pages = {140--144},
  doi = {10.5755/j01.ms.17.2.482}
}
Kostenlos starten →