Multi-Disciplinary Design Optimization of a Reentry Capsule Using Multi-Objective Differential Evolution (MODE) Algorithm
Journal of Computers, Mechanical and Management · 30.06.2026 · 5 (3)
DOI: 10.57159/jcmm.5.3.26733 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Computers, Mechanical and Management, online erschienen am 30.06.2026. Verfasst von Md. Shaishab Ahmed Shetu und 2 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This paper presents a novel application of the Multi-Objective Differential Evolution (MODE) algorithm for the multidisciplinary design optimization of a reentry capsule. The primary design aims at maximizing the center of pressure position (Xcp) to enhance longitudinal aerodynamic stability, while simultaneously minimizing the wetted surface area (As) to reduce thermal load and structural mass, all under a volumetric constraint (V > 3.0 m³) for payload accommodation. A sphere-cone-flare geometry is parameterized using five key design variables: nose radius (RN), cone half-angle (θ1), cone length (l1), flare angle (θ2), and flare length (l2). The constrained design space is methodically navigated by the MATLAB implemented framework, which produces a Pareto optimal front that performs noticeably better than a benchmark study using NSGA-II. The optimized design strategy consistently converges to a semi-blunt configuration with parameter values of θ1 = 15.0°, l1, l2 → 1.0 m, and RN ≈ 0.462 m. This design achieves an Xcp of 1.514 m with an As of only 10.776 m², a significant improvement over previous results. The most important driver is the flare length (l2) for both objectives, according to a comprehensive global sensitivity analysis using Latin Hypercube Sampling (LHS) and Spearman rank correlation, which quantifies the impact of each design parameter. In addition to establishing a validated, Pareto optimal design family that pushes the boundaries of reentry vehicle conceptual design, this study validates MODE as a reliable and effective optimizer for complex aerospace design problems.
Zitieren
APA
Shetu, M. S. A., Rahman, T., & Awal, Z. B. A. (2026). Multi-Disciplinary Design Optimization of a Reentry Capsule Using Multi-Objective Differential Evolution (MODE) Algorithm. Journal of Computers, Mechanical and Management, 5(3). https://doi.org/10.57159/jcmm.5.3.26733
Vancouver
Shetu MSA, Rahman T, Awal ZBA. Multi-Disciplinary Design Optimization of a Reentry Capsule Using Multi-Objective Differential Evolution (MODE) Algorithm. Journal of Computers, Mechanical and Management. 2026;5(3). doi:10.57159/jcmm.5.3.26733
BibTeX
@article{Shetu2026,
author = {Shetu, Md. Shaishab Ahmed and Rahman, Tawfiqur and Awal, Ziad Bin Abdul},
title = {Multi-Disciplinary Design Optimization of a Reentry Capsule Using Multi-Objective Differential Evolution (MODE) Algorithm},
journal = {Journal of Computers, Mechanical and Management},
year = {2026},
volume = {5},
number = {3},
doi = {10.57159/jcmm.5.3.26733}
}
EUVIMED