Response Surface Methodology (RSM) Approach for Optimizing Waste-Based Acoustic Panels in Generator Set Noise Reduction at PT X
Journal of Emerging Supply Chain, Clean Energy, and Process Engineering · 31.10.2026 · 5 (2) · 143-157
DOI: 10.57102/jescee.v5i2.162 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Emerging Supply Chain, Clean Energy, and Process Engineering, online erschienen am 31.10.2026. Verfasst von Muthi'ah Nur Fadlilah und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
Generator set operation at PT X produced noise levels above the workplace threshold limit, reaching 89.9 dBA in 2025. This study aimed to optimize generator set noise reduction using waste-based acoustic panels made from bamboo, cassava peel, and sawdust through Response Surface Methodology (RSM). The analyzed factors were material type, panel thickness, and testing duration, while the response was noise reduction in decibels. The experimental data were processed using Design Expert software with a D-Optimal design. The results showed that the linear model was the most suitable model, with a significant p-value, non-significant lack of fit, and good predictive ability. ANOVA results indicated that material type was the most dominant factor, followed by panel thickness and testing duration. Among the three waste materials, bamboo composite produced the best damping performance. The optimum condition was achieved using bamboo composite with a thickness of 2 cm, resulting in a predicted noise reduction of approximately 12 dB. The optimized result was then applied to a generator set enclosure design using SketchUp to support practical visualization and technical planning. Keywords : Acoustic Panel; Generator Set Noise; Noise Reduction; Response Surface Methodology; Waste Materials.
Zitieren
APA
Fadlilah, M. N., Agustine, A. D., Anggraini, N. L., Ramadan, G., & Khayyirah, A. N. (2026). Response Surface Methodology (RSM) Approach for Optimizing Waste-Based Acoustic Panels in Generator Set Noise Reduction at PT X. Journal of Emerging Supply Chain, Clean Energy, and Process Engineering, 5(2), 143-157. https://doi.org/10.57102/jescee.v5i2.162
Vancouver
Fadlilah MN, Agustine AD, Anggraini NL, Ramadan G, Khayyirah AN. Response Surface Methodology (RSM) Approach for Optimizing Waste-Based Acoustic Panels in Generator Set Noise Reduction at PT X. Journal of Emerging Supply Chain, Clean Energy, and Process Engineering. 2026;5(2):143-157. doi:10.57102/jescee.v5i2.162
BibTeX
@article{Fadlilah2026,
author = {Fadlilah, Muthi'ah Nur and Agustine, Arlita Dwi and Anggraini, Novita Lizza and Ramadan, Gilang and Khayyirah, Athaya Nur},
title = {Response Surface Methodology (RSM) Approach for Optimizing Waste-Based Acoustic Panels in Generator Set Noise Reduction at PT X},
journal = {Journal of Emerging Supply Chain, Clean Energy, and Process Engineering},
year = {2026},
volume = {5},
number = {2},
pages = {143--157},
doi = {10.57102/jescee.v5i2.162}
}
EUVIMED