Analysis of Work Measurement Using the Stopwatch Time Study Method at PTEA
Journal of Industrial System Engineering and Management · 31.03.2023 · 2 (1) · 23-31
DOI: 10.56882/jisem.v2i1.14 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Industrial System Engineering and Management, online erschienen am 31.03.2023. Verfasst von Masniar Masniar und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In the era of globalization or the world of free trade, competition in the industrial world is increasing rapidly, this causes business competition to increase. Seeing the importance of measuring every activity carried out by the company, an accurate measurement method is needed to be able to provide accurate information on the time needed and the efficiency of each product activity in meeting production targets to achieve profits. The Stopwatch Time Study method is a work measurement technique using a stopwatch as a means of measuring the time shown in the completion of an observed activity. From the measurement results, a standard time will be obtained to complete a work cycle, where this time will be used as a standard for completing work for all workers who will carry out the same work as that. To determine the standard time, first calculate the cycle time and the time normal considering the degree of adjustment and allowance. Based on the results of data processing and discussion, it can be concluded that the lowest normal time is for employee 2 with a time of 39.05 seconds. Employee adjustment factor 2 with a total adjustment of +0.12 and employee allowance factor 2 with a total allowance of 22.
Zitieren
APA
Masniar, M., Marasabessy, U. R., Astrides, E., Ahistasari, A., Wahyudien, M. A. N., & Rachmadhani, M. M. (2023). Analysis of Work Measurement Using the Stopwatch Time Study Method at PTEA. Journal of Industrial System Engineering and Management, 2(1), 23-31. https://doi.org/10.56882/jisem.v2i1.14
Vancouver
Masniar M, Marasabessy UR, Astrides E, Ahistasari A, Wahyudien MAN, Rachmadhani MM. Analysis of Work Measurement Using the Stopwatch Time Study Method at PTEA. Journal of Industrial System Engineering and Management. 2023;2(1):23-31. doi:10.56882/jisem.v2i1.14
BibTeX
@article{Masniar2023,
author = {Masniar, Masniar and Marasabessy, Umar Rusli and Astrides, Engelberto and Ahistasari, Asih and Wahyudien, Mohammad Arief Nur and Rachmadhani, Mirga Maulana},
title = {Analysis of Work Measurement Using the Stopwatch Time Study Method at PTEA},
journal = {Journal of Industrial System Engineering and Management},
year = {2023},
volume = {2},
number = {1},
pages = {23--31},
doi = {10.56882/jisem.v2i1.14}
}
EUVIMED