Development of an information system for visualization of 3D models and development of a prototype for measuring 3D objects
Geologické práce Správy · 2026-06 · 143 · 5-85
DOI: 10.56623/gps.143.1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Geologické práce Správy, 2026-06. Verfasst von Róbert Cibula.
Abstract (Originalsprache)
3D cartographic visualization on the Internet is one of the techniques used in various application sectors. These forms of visualization are increasingly appearing in geological science. Despite the fact that several 3D geological models have been produced in Slovakia, they are not available on the Internet due to problems with exports from modelling software. The work deals with the development and implementation of a web information system for 2D and 3D cartographic visualization of natural resources and the creation of a prototype with a laser scanner, electronic compass, GNSS and Bluetooth transmission to a mobile application for collecting 3D points. The prototype of the device verified the possibilities of creating data for 3D models and their subsequent publication in 3D cartographic visualization. In the submitted work, user and technical aspects of 3D visualization were analysed and defined, in general, with regard to the specifics in the sector of geology and forestry, in particular. In addition, aspects related to microcomputer platforms were taken into account in the development of the prototype. Verification of the proposed concepts and newly developed technologies was performed in four areas of interest. Methods for exporting data from modelling software and searching for a format for displaying a 3D model were searched using the data from the Hornonitrianska kotlina Basin. The groundwork data for the 3D model of the Headquarters of the State Geological Institute of Dionýz Štúr (SGIDŠ) with samples of mineral raw materials were collected using UAV photogrammetry. Two 3D models of the area created by different procedures were tested for the response of the visualisation. The forest stand complex with 1 million trees was used to verify the concepts of displaying a large number of 3D objects. In the territory of the Slovak Republic, methods obtained in smaller areas were used and a 3D model of the Slovak Republic was compiled. The results in the form of a 3D WebGIS application along with the measurement of the display response of individual 3D models were successfully verified at SGIDŠ. Subsequently, they have been integrated into the Institute’s information system. The results of the dissertation ranked the Slovak Republic among the countries that display 3D geological models on the Internet.
Zitieren
APA
Cibula, R. (2026). Development of an information system for visualization of 3D models and development of a prototype for measuring 3D objects. Geologické práce Správy, 143, 5-85. https://doi.org/10.56623/gps.143.1
Vancouver
Cibula R. Development of an information system for visualization of 3D models and development of a prototype for measuring 3D objects. Geologické práce Správy. 2026;143:5-85. doi:10.56623/gps.143.1
BibTeX
@article{Cibula2026,
author = {Cibula, Róbert},
title = {Development of an information system for visualization of 3D models and development of a prototype for measuring 3D objects},
journal = {Geologické práce Správy},
year = {2026},
volume = {143},
pages = {5--85},
doi = {10.56623/gps.143.1}
}
EUVIMED