Surface Morphology Evolution of Y-123 and Y-123+Sm Thin Films Before and After Post-Annealing
Journal of Material Science and Radiation · 2026
DOI: 10.56566/jmsr.v2i2.695 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Material Science and Radiation, 2026. Verfasst von Siew Hong Yap und 10 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Thin film surface morphology strongly influences their superconducting properties. However, there remains a research gap in comparative studies on the surface morphology of YBa₂Cu₃O7-δ (Y-123) thin films with Sm nano-inclusions (Y-123+Sm) and the effects of post-annealing. Therefore, this study presents a comparative analysis of the surface morphology of pure Y-123 and Y-123+Sm superconducting thin films deposited by Pulsed Laser Deposition (PLD). The deposited films were post-annealed in flowing oxygen at 900 °C for 18 hours. Surface morphology observations using a Polarized Optical Microscope (POM) for both pure Y-123 and Y-123+Sm thin films before and after post-annealing reveal a reduction in pores and agglomerated grains, accompanied by a decrease in grain size. Further analysis using an Atomic Force Microscope (AFM) indicates that the pure Y-123 film exhibits a decrease in average surface height and surface roughness after post-annealing. Interestingly, compared with the film before post-annealing, the Y-123 thin film after post-annealing shows more hole-like features and volcano-like island growth structures, together with a reduction in island peak height from 377.2 nm to 170.5 nm. In contrast, Y-123+Sm thin films demonstrate a more desirable island growth morphology despite exhibiting a relatively rougher surface after post-annealing. Structural analysis of X-ray Diffraction (XRD) spectra indicates improved crystallinity for both Y-123 and Y-123+Sm thin films after post-annealing. These findings provide fundamental insights for the development of superconducting materials for future applications, such as quantum computing devices and power transmission technologies based on Y-123 superconductors
Zitieren
APA
Yap, S. H., Kechik, M. M. A., Yusuf, N. N. M., Mohamed, A. R. A., Chen, S. K., Lim, K. P., Shabdin, M. K., Karim, M. K. A., Hapipi, N. M., Doyan, A., & Shaari, A. H. (2026). Surface Morphology Evolution of Y-123 and Y-123+Sm Thin Films Before and After Post-Annealing. Journal of Material Science and Radiation. https://doi.org/10.56566/jmsr.v2i2.695
Vancouver
Yap SH, Kechik MMA, Yusuf NNM, Mohamed ARA, Chen SK, Lim KP, et al. Surface Morphology Evolution of Y-123 and Y-123+Sm Thin Films Before and After Post-Annealing. Journal of Material Science and Radiation. 2026. doi:10.56566/jmsr.v2i2.695
BibTeX
@article{Yap2026,
author = {Yap, Siew Hong and Kechik, Mohd Mustafa Awang and Yusuf, Nur Nabilah Mohd and Mohamed, Arebat Ryad Alhadei and Chen, Soo Kien and Lim, Kean Pah and Shabdin, Muhammad Kashfi and Karim, Muhammad Khalis Abdul and Hapipi, Nurhidayah Mohd and Doyan, Aris and Shaari, Abdul Halim},
title = {Surface Morphology Evolution of Y-123 and Y-123+Sm Thin Films Before and After Post-Annealing},
journal = {Journal of Material Science and Radiation},
year = {2026},
doi = {10.56566/jmsr.v2i2.695}
}
EUVIMED