Heat and Mass Transfer Evaluation of Geosynthetic-Insulation Cover for a Pit Thermal Energy Storage System
Australian Geomechanics Journal · 01.12.2026 · 61 (4) · 137-144
DOI: 10.56295/agj6148 ↗Kurz gefasst
Fachartikel in der Zeitschrift Australian Geomechanics Journal, erschienen am 01.12.2026. Verfasst von Sadib Bin Kabir und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Pit Thermal Energy Storage (PTES) is one of the most cost-effective seasonal storage technologies available to support Australia's transition to a net-zero energy system. Its floating geosynthetic insulation cover is the most thermally critical and expensive PTES component, accounting for 40–60% of system cost and driving most operational heat loss. This study presents a novel coupled heat- and mass-transfer framework for a PTES geosynthetic-insulation cover system tailored to Australian conditions. The model accounts for radiative exchange, atmospheric emissivity, ambient temperature dynamics, and wind-driven convection, with moisture transport described by Stefan diffusion and driven by saturation vapour pressure gradients. Comparative simulations between a heat-transfer reference model and a coupled heat-and- mass-transfer model representing a non-functional drainage system were conducted to quantify heat losses from a cover- system PTES facility located in Northern Victoria. The results show that coupled heat and moisture transport governs cover performance. The surface heat-transfer coefficient increased fivefold (from 0.15 to 0.80 W/m²·K), and cumulative weekly heat loss increased sixfold (from 6.3 to 37.5 MJ/m²). These findings are consistent with moisture-induced insulation deterioration documented at European PTES facilities. The validated framework provides a rigorous basis for optimising cover thickness, material specification, and drainage design across Australian climate zones.
Zitieren
APA
Kabir, S. B., & Bouazza, A. (2026). Heat and Mass Transfer Evaluation of Geosynthetic-Insulation Cover for a Pit Thermal Energy Storage System. Australian Geomechanics Journal, 61(4), 137-144. https://doi.org/10.56295/agj6148
Vancouver
Kabir SB, Bouazza A. Heat and Mass Transfer Evaluation of Geosynthetic-Insulation Cover for a Pit Thermal Energy Storage System. Australian Geomechanics Journal. 2026;61(4):137-144. doi:10.56295/agj6148
BibTeX
@article{Kabir2026,
author = {Kabir, Sadib Bin and Bouazza, Abdelmalek},
title = {Heat and Mass Transfer Evaluation of Geosynthetic-Insulation Cover for a Pit Thermal Energy Storage System},
journal = {Australian Geomechanics Journal},
year = {2026},
volume = {61},
number = {4},
pages = {137--144},
doi = {10.56295/agj6148}
}
EUVIMED