Class-II Behaviour and Strainburst Propensity in Brittle Rocks
Australian Geomechanics Journal · 01.12.2026 · 61 (4) · 81-96
DOI: 10.56295/agj6144 ↗Kurz gefasst
Fachartikel in der Zeitschrift Australian Geomechanics Journal, erschienen am 01.12.2026. Verfasst von Murat Karakus und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Class-II, or snap-back, behaviour is a genuine mechanical response and experimentally reproducible post-peak response of hard, brittle rocks, in which failure is sustained by the release of elastic strain energy stored within the rock specimen. To obtain the complete Class-II post-peak response, lateral-strain feedback control has been used in compression and indirect-tension tests on a wide range of brittle rocks and high-strength concrete. The repeatability of the snap-back paths demonstrates that the response is not a servo-control artefact. Loading rate, specimen geometry, gauge length, fracture localisation, and the control system should be selected carefully to record Class-II behaviour of the specimen. This paper critically integrates the experimental, theoretical and numerical studies and develops a mechanics-based framework for relating the complete post-peak response to strainburst propensity. The framework combines: (i) lateral-feedback- controlled compression and indirect-tension tests that obtain the complete Class-II post-peak path; (ii) an incremental energy balance that distinguishes changes in the elastic energy of the specimen and loading system from energy dissipated through fracture growth, frictional sliding and other measured irreversible processes; and (iii) fracture-energy-regularised numerical modelling that evaluates the measured post-peak response under relevant stress paths and rock-mass boundary stiffnesses. Within this framework, the degree of snap-back characterises the proportion of released elastic strain energy remaining after the post-peak rupture-energy demand has been satisfied. A greater excess-energy fraction indicates a stronger intrinsic capacity for self-sustaining failure. The potential intensity of dynamic failure also depends on the absolute elastic energy storage capacity: a rock specimen that can both store substantial elastic energy and release a large portion of excess energy has greater potential for rapid fragmentation and ejection. Class-II behaviour therefore provides a quantitative indicator of strainburst propensity. Translating this to field occurrence and severity also requires considering the in-situ stress state and path, rock volume, surrounding rock mass stiffness, geological structure, and admissible ejection mechanism.
Zitieren
APA
Karakus, M., & Nguyen, G. (2026). Class-II Behaviour and Strainburst Propensity in Brittle Rocks. Australian Geomechanics Journal, 61(4), 81-96. https://doi.org/10.56295/agj6144
Vancouver
Karakus M, Nguyen G. Class-II Behaviour and Strainburst Propensity in Brittle Rocks. Australian Geomechanics Journal. 2026;61(4):81-96. doi:10.56295/agj6144
BibTeX
@article{Karakus2026,
author = {Karakus, Murat and Nguyen, Giang},
title = {Class-II Behaviour and Strainburst Propensity in Brittle Rocks},
journal = {Australian Geomechanics Journal},
year = {2026},
volume = {61},
number = {4},
pages = {81--96},
doi = {10.56295/agj6144}
}
EUVIMED