Residual Shear Strength Of Rock Discontinuities: Why Scale Matters And A New Approach To Predict It
Australian Geomechanics Journal · 01.12.2026 · 61 (4) · 69-78
DOI: 10.56295/agj6143 ↗Kurz gefasst
Fachartikel in der Zeitschrift Australian Geomechanics Journal, erschienen am 01.12.2026. Verfasst von Olivier Buzzi und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Residual shear strength is a key parameter in the design and analysis of rock engineering stability problems. The residual friction angle is commonly assumed to be scale independent and constant. This paper investigates the validity of this assumption through a combined experimental and numerical study focused on rough rock discontinuities. Laboratory cyclic shear tests performed on mortar, sandstone and limestone specimens demonstrate that the residual friction angle is not constant but decreases with increasing normal stress. This behaviour is attributed to the progressive degradation of residual asperities that remain active after peak strength mobilisation. The stress dependence of residual friction angle suggests that residual shear strength, like peak shear strength, should exhibit a scale effect due to the inherently scale-dependent nature of surface roughness. To explore this hypothesis, the residual shear strength of four large natural discontinuities was analysed numerically using the Newcastle Discontinuity Shear Strength (NDSS) model. Each surface was subdivided into smaller subsurfaces to assess the influence of scale. The results confirm the existence of a scale effect, showing that residual strength varies significantly between full-scale surfaces and their constituent subsurfaces. Estimates derived from small specimens were found to either overestimate or underestimate the full-scale residual strength by as much as 47% and 85%, respectively. Such large errors highlight the need to estimate residual strength at the scale of the project, not from cores. The Stochastic Approach for Discontinuity Shear Strength (StADSS) was applied to predict residual strength at large scale using limited roughness information from trace data. The method provides predictions that are consistent with those obtained from full surface analyses, demonstrating its capability to account for scale effects in a rigorous and practical manner. The findings of this study emphasise the importance of considering both stress and scale effects when estimating residual shear strength and provide a robust framework for improving its prediction in engineering applications.
Zitieren
APA
Buzzi, O., Butcher, C., & Vidler, A. (2026). Residual Shear Strength Of Rock Discontinuities: Why Scale Matters And A New Approach To Predict It. Australian Geomechanics Journal, 61(4), 69-78. https://doi.org/10.56295/agj6143
Vancouver
Buzzi O, Butcher C, Vidler A. Residual Shear Strength Of Rock Discontinuities: Why Scale Matters And A New Approach To Predict It. Australian Geomechanics Journal. 2026;61(4):69-78. doi:10.56295/agj6143
BibTeX
@article{Buzzi2026,
author = {Buzzi, Olivier and Butcher, Clarence and Vidler, Andrew},
title = {Residual Shear Strength Of Rock Discontinuities: Why Scale Matters And A New Approach To Predict It},
journal = {Australian Geomechanics Journal},
year = {2026},
volume = {61},
number = {4},
pages = {69--78},
doi = {10.56295/agj6143}
}
EUVIMED