EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and implementation of a control system in an autoclave as an educational tool for biomedical engineering students

Deybi Maldonado Lopez, Eynar Calle Viles, Elio Denis Machuca Flores, Rommer Alex Ortega-Martinez

eVitroKhem · 01.01.2026 · 5 · 375

DOI: 10.56294/evk2026375 ↗

Kurz gefasst

Fachartikel in der Zeitschrift eVitroKhem, online erschienen am 01.01.2026. Verfasst von Deybi Maldonado Lopez und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focused on the design and implementation of an automated control system for a Pelton & Crane model MC autoclave, with the aim of transforming it into a modern and didactic tool for Biomedical Engineering students. The equipment was structurally redesigned, and sensors, actuators, and a graphical user interface were integrated to illustrate the internal operation of the sterilizer in real time. The educational strategy was structured into four sequential stages: (1) identification of components and maintenance practices, (2) animated visualization of the sterilization cycle, (3) demonstration of the water treatment system, and (4) diagnosis of common faults. To validate the academic impact, knowledge surveys were applied before and after the practical experience. The results showed a significant improvement in students’ understanding of sterilization principles and autoclave maintenance. The modified device achieved standard sterilization conditions (121 °C, 205 kPa), and its educational use led to a 94% increase in average student performance on evaluations. Overall, the educational autoclave proved to be an effective tool for reinforcing hands-on learning and enhancing the training of future biomedical engineers.

Zitieren

APA

Lopez, D. M., Viles, E. C., Flores, E. D. M., & Ortega-Martinez, R. A. (2026). Design and implementation of a control system in an autoclave as an educational tool for biomedical engineering students. eVitroKhem, 5, 375. https://doi.org/10.56294/evk2026375

Vancouver

Lopez DM, Viles EC, Flores EDM, Ortega-Martinez RA. Design and implementation of a control system in an autoclave as an educational tool for biomedical engineering students. eVitroKhem. 2026;5:375. doi:10.56294/evk2026375

BibTeX
@article{Lopez2026,
  author = {Lopez, Deybi Maldonado and Viles, Eynar Calle and Flores, Elio Denis Machuca and Ortega-Martinez, Rommer Alex},
  title = {Design and implementation of a control system in an autoclave as an educational tool for biomedical engineering students},
  journal = {eVitroKhem},
  year = {2026},
  volume = {5},
  pages = {375},
  doi = {10.56294/evk2026375}
}
Kostenlos starten →