Investigation Thermal Performance of Heat Sink by Using Metal Foam Partially Immersed in PCM
NTU Journal of Engineering and Technology · 01.03.2026 · 5 (1) · 133-142
DOI: 10.56286/3a2wr673 ↗Kurz gefasst
Fachartikel in der Zeitschrift NTU Journal of Engineering and Technology, online erschienen am 01.03.2026. Verfasst von Shahad Muwafaq Younus und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research includes a practical investigation on the impacts of adding phase change materials (PCMs) into metal foam made from copper in heat sinks, as well as using metal foam alone during heating and cooling. This study used RT55 paraffin as a phase change material. Five cases were used in the experiments. Each one contained a varied quantity of PCM and copper metal foam, in addition to the centrifugal fan-forced airflow inside the device duct and electrical heating of a plate made of copper under the thermal dissipator. This study looked at the impact of thermal energy and intake air velocity coefficients on five heat sink cases Throughout the process of heating and process of cooling. The findings indicate that in the situation of copper foam (case 3), The copper plate has a lower temperature relative to the other instances. During the heating procedure, cases 5 (Paraffin partly filled copper foam) and 3 (2-piece foams made of copper) showed percentage temperature reductions of 57.46% and 66.4% respectively, when compared to case 1 (Absent paraffin or copper foam). During the process of cooling, the high conductivity for copper foam results in case 3 having temperatures that are 43.5% lower than that of case 5, which is 34.7%. furthermore, raising the input air velocity includes less of an impact on heating reduction in scenarios involving phase change materials (PCMs).
Zitieren
APA
Younus, S. M., & Abedalh, A. S. (2026). Investigation Thermal Performance of Heat Sink by Using Metal Foam Partially Immersed in PCM. NTU Journal of Engineering and Technology, 5(1), 133-142. https://doi.org/10.56286/3a2wr673
Vancouver
Younus SM, Abedalh AS. Investigation Thermal Performance of Heat Sink by Using Metal Foam Partially Immersed in PCM. NTU Journal of Engineering and Technology. 2026;5(1):133-142. doi:10.56286/3a2wr673
BibTeX
@article{Younus2026,
author = {Younus, Shahad Muwafaq and Abedalh, Ayad Suleiman},
title = {Investigation Thermal Performance of Heat Sink by Using Metal Foam Partially Immersed in PCM},
journal = {NTU Journal of Engineering and Technology},
year = {2026},
volume = {5},
number = {1},
pages = {133--142},
doi = {10.56286/3a2wr673}
}
EUVIMED