Evaluation of artifacts in cone-beam computed tomography from different intraradicular pins and cementation materials using different exposure protocols
Imaging Science in Dentistry · 2026 · 56 (2) · 176
DOI: 10.5624/isd.20250320 ↗Kurz gefasst
Fachartikel in der Zeitschrift Imaging Science in Dentistry, 2026. Verfasst von Jhonatan Thiago Lacerda-Santos und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral Diagnosis, State University of Paraíba, Campina Grande, Brazil. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0).
Abstract (Originalsprache)
Purpose
To evaluate the generation of artifacts from intraradicular pins and cementation materials in cone-beam computed tomography images, using different exposure protocols.Materials and Methods: Sixty extracted single-rooted premolars human were divided into six groups such as G1: Fiberglass pin with Allcem cement, G2: Metal core fiberglass pin core with Allcem cement, G3: metal core fiberglass pin with Allcem Core cement, G4: Fiberglass pin with Allcem Core cement, G5: Fiberglass pin with Panavia cement, and G6: metal core fiberglass pin with Panavia cement.CBCT images were acquired on the Orthophos XG ® 3D (Sirona Dental Systems, Bensheim, Germany) following the protocols with the exposure parameters; 1) high definition (HD) mode (70 kV and 6 mA, voxel size 100 μm, scan time 14 s, 500 basis images), and 2) non-HD mode (70 kV and 10 mA, voxel size 160 μm, scan time 5 s, 200 basis images).Two-way analysis of variance (ANOVA) and Tukey HSD post-hoc tests, Fisher's exact test and the McNemar test were performed to detect statistically significant factors.
Results
For both HD and non-HD acquisition modes, the percentage of severe artifacts was higher in groups G3 and G6 (P 0.05). Conclusion:The type of fiberglass pin and cement used did not affect the production of the artifacts.When evaluating the scanning modes, the non-HD mode, which had lower mAs and fewer image bases, showed less artifact severity on the assessed CBCT scans.(Imaging Sci Dent 20250320)
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Oral Diagnosis, State University of Paraíba, Campina Grande, Brazil.
- Department of Dentistry, UNIFIP Campina Grande, Campina Grande, Brazil.
- Department of Oral Radiology, Patos University Center, Patos, Brazil.
- Department of Dentistry, University of Saskatchewan, Saskatoon, Canada.
ORCID-Profile: Jhonatan Thiago Lacerda-Santos, Gélica Lima Granja, Raelly Katharinne Lima Meneses, Martina Gerlane de Oliveira Pinto, Daniela Pita de Melo, Jalber Almeida Dos Santos
Zitieren
APA
Lacerda-Santos, J. T., Granja, G. L., Meneses, R. K. L., de Oliveira Pinto, M. G., de Melo, D. P., & Dos Santos, J. A. (2026). Evaluation of artifacts in cone-beam computed tomography from different intraradicular pins and cementation materials using different exposure protocols. Imaging Science in Dentistry, 56(2), 176. https://doi.org/10.5624/isd.20250320
Vancouver
Lacerda-Santos JT, Granja GL, Meneses RKL, de Oliveira Pinto MG, de Melo DP, Dos Santos JA. Evaluation of artifacts in cone-beam computed tomography from different intraradicular pins and cementation materials using different exposure protocols. Imaging Science in Dentistry. 2026;56(2):176. doi:10.5624/isd.20250320
BibTeX
@article{LacerdaSantos2026,
author = {Lacerda-Santos, Jhonatan Thiago and Granja, Gélica Lima and Meneses, Raelly Katharinne Lima and de Oliveira Pinto, Martina Gerlane and de Melo, Daniela Pita and Dos Santos, Jalber Almeida},
title = {Evaluation of artifacts in cone-beam computed tomography from different intraradicular pins and cementation materials using different exposure protocols},
journal = {Imaging Science in Dentistry},
year = {2026},
volume = {56},
number = {2},
pages = {176},
doi = {10.5624/isd.20250320}
}
EUVIMED