Tinjauan Metode Perbaikan Dan Perkuatan Struktur Beton Berdasarkan Durabilitas Material, Kinerja Antarmuka, dan Teknologi FRP
Journal of Infrastructure and Construction Technology · 15.10.2025 · 3 (2) · 23-37
DOI: 10.56208/jictech.3.2.23-37 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Infrastructure and Construction Technology, online erschienen am 15.10.2025. Verfasst von Muhammad Naja. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Concrete rehabilitation requires material compatibility, durable interfaces, and strengthening systems suited to the damage mechanism. This narrative review integrates three principal reviews with selected experimental and field studies, retaining the comparator and test context of each result. Groove-epoxy shear strengthening increased ultimate beam loads by 8.2–52.4% relative to EBR CFRP plates and by 12.9–48.3% relative to EBR sheets; shear failure and delamination were not eliminated. In one six-T-beam flexural study with equal CFRP quantities, NSM achieved approximately 7.6% higher ultimate load than EBR. Calculations from a repair-mortar dataset showed that 5–10% SBR reduced total shrinkage by 13.9–20.9%, while compressive strength decreased, indicating a dimensional–mechanical trade-off. These material measurements do not directly quantify interface shrinkage or field fatigue. The six-stage rehabilitation sequence is compared with the published scope of ACI 562 and EN 1504 and positioned as an evidence-traceability synthesis rather than a new code. A retrospective mapping of a prestressed FRP repair project involving three bridges and 23 months of monitored operation illustrates applicability, but does not constitute independent validation. The synthesis therefore supports conditional method selection while identifying the need for multi-project and cyclic-exposure verification.
Zitieren
APA
Naja, M. (2025). Tinjauan Metode Perbaikan Dan Perkuatan Struktur Beton Berdasarkan Durabilitas Material, Kinerja Antarmuka, dan Teknologi FRP. Journal of Infrastructure and Construction Technology, 3(2), 23-37. https://doi.org/10.56208/jictech.3.2.23-37
Vancouver
Naja M. Tinjauan Metode Perbaikan Dan Perkuatan Struktur Beton Berdasarkan Durabilitas Material, Kinerja Antarmuka, dan Teknologi FRP. Journal of Infrastructure and Construction Technology. 2025;3(2):23-37. doi:10.56208/jictech.3.2.23-37
BibTeX
@article{Naja2025,
author = {Naja, Muhammad},
title = {Tinjauan Metode Perbaikan Dan Perkuatan Struktur Beton Berdasarkan Durabilitas Material, Kinerja Antarmuka, dan Teknologi FRP},
journal = {Journal of Infrastructure and Construction Technology},
year = {2025},
volume = {3},
number = {2},
pages = {23--37},
doi = {10.56208/jictech.3.2.23-37}
}
EUVIMED