EUVIMEDEUVIMED entdecken
Crossref

The Effect of Heat Treatments Applied to Continuous Fiber Reinforced Thermoplastic Composites on Mechanical Properties

Bahri Barış VATANDAŞ, Recep GÜMRÜK, Altuğ UŞUN, Nuri YILDIZ

Open Journal of Nano · 2022

DOI: 10.56171/ojn.1034323 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Open Journal of Nano, 2022. Verfasst von Bahri Barış VATANDAŞ und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effects of different heat treatments on continuous fiber-reinforced thermoplastic (CFRTP) 's. CFRTP composite is produced using fused deposition modeling (FDM), which is one of the additive manufacturing methods. Polylactic acid (PLA) was used as a matrix, and carbon fibers (3K) were utilized as reinforcement material. First, CFRTP filament was produced on a specially designed melt impregnation line. Afterward, test samples were manufactured via a conventional 3D printer. Then, heat treatments (re-melting in salt, microwave oven, oven) were applied to the produced samples, and the effects of these processes on mechanical properties were investigated. Three-point bending tests were used to investigate the mechanical properties of the test samples. As a result of the heat treatments applied to the CFRTP specimens, flexural stresses between 200 and 220 MPa was achieved. The highest bending stress was obtained by re-melting in salt. As a result of the heat treatments, the stress values are similar, but the re-melting in salt application exhibited a more rigid behavior.

Zitieren

APA

VATANDAŞ, B. B., GÜMRÜK, R., UŞUN, A., & YILDIZ, N. (2022). The Effect of Heat Treatments Applied to Continuous Fiber Reinforced Thermoplastic Composites on Mechanical Properties. Open Journal of Nano. https://doi.org/10.56171/ojn.1034323

Vancouver

VATANDAŞ BB, GÜMRÜK R, UŞUN A, YILDIZ N. The Effect of Heat Treatments Applied to Continuous Fiber Reinforced Thermoplastic Composites on Mechanical Properties. Open Journal of Nano. 2022. doi:10.56171/ojn.1034323

BibTeX
@article{VATANDA2022,
  author = {VATANDAŞ, Bahri Barış and GÜMRÜK, Recep and UŞUN, Altuğ and YILDIZ, Nuri},
  title = {The Effect of Heat Treatments Applied to Continuous Fiber Reinforced Thermoplastic Composites on Mechanical Properties},
  journal = {Open Journal of Nano},
  year = {2022},
  doi = {10.56171/ojn.1034323}
}
Kostenlos starten →