EUVIMEDEUVIMED entdecken
Crossref

Evaluation on the Temperature and Calcination Time During Sol-gel Coating of TiO2 on Iron Foam substrate

Raden Dadan Ramdan, Luqman Haris, Hendra Hermawan, Bambang Sunendar

MESIN · 2017

DOI: 10.5614/mesin.2017.26.1.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift MESIN, 2017. Verfasst von Raden Dadan Ramdan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Iron foam is iron based material which is widely applied due to its unique properties. However since corrosion is also a problem for this material, coating with innert material is required in enhancing its applications. In the present research, TiO 2 coating is performed on iron foam suface by sol-gel dipping method. Focus is given on the study of the effect of calcinations temperature and time on the coating characteristics. TiCl 4 is used as the precursor with concentration of 0.3 M, added with 1M HCl solution and chitosan soluation with concentration of 1%. Calcination is performed at temperature of 400, 500 dan 600 o C and calcinations time of 1 and 3 hours inside controlled gas furnace using nitrogen atmosphere. Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) characterization data shows that TiO 2 particles form on the iron foam substrate. SEM characterization on the sample heated at 400 o C and heating time of 1 hour shows the formation of nano particle titania (0.06 μm) which is homogeneously distributed with less agglomeration than others and considered as the best sample in the present research. As the temperature and time of calcinations increase, more inhomogeneous particle distribution and bigger particles form.

Zitieren

APA

Ramdan, R. D., Haris, L., Hermawan, H., & Sunendar, B. (2017). Evaluation on the Temperature and Calcination Time During Sol-gel Coating of TiO2 on Iron Foam substrate. MESIN. https://doi.org/10.5614/mesin.2017.26.1.1

Vancouver

Ramdan RD, Haris L, Hermawan H, Sunendar B. Evaluation on the Temperature and Calcination Time During Sol-gel Coating of TiO2 on Iron Foam substrate. MESIN. 2017. doi:10.5614/mesin.2017.26.1.1

BibTeX
@article{Ramdan2017,
  author = {Ramdan, Raden Dadan and Haris, Luqman and Hermawan, Hendra and Sunendar, Bambang},
  title = {Evaluation on the Temperature and Calcination Time During Sol-gel Coating of TiO2 on Iron Foam substrate},
  journal = {MESIN},
  year = {2017},
  doi = {10.5614/mesin.2017.26.1.1}
}
Kostenlos starten →