EUVIMEDEUVIMED entdecken
Crossref

Modelling and Optimization of Primary Steam Reformer System Case Study: the Primary Reformer PT Petrokimia Gresik Indonesia

S D. Nugrahani, Y. Y. Nazaruddin, E. Ekawati, S. Nugroho

Jurnal Otomasi Kontrol dan Instrumentasi · 2009

DOI: 10.5614/joki.2009.1.1.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Otomasi Kontrol dan Instrumentasi, 2009. Verfasst von S D. Nugrahani und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steam reforming of hydrocarbons has been in use as the principal process for the generation of hydrogen and synthesis gas needed in the Ammonia production in petrochemical industries. Optimal operation of existing steam reformers is crucial in view of the high energy consumption and large value addition involved in the process. The economic objective of the process is determined by the cost of gas (Methane), the cost of steam and additional fuel. An optimum steam to gas ratio is expected from an optimum process control. This can be applied on ratio control parameter for natural gas feed. In addition, steam Carbon Ratio is used to decrease coke formation in catalyst reformer. This paper presents the model identification and optimization of reforming control system of an industrial Primary Reformer at PT. Petrokimia Gresik (One of the fertilizer petrochemical industry in Indonesia). The reformer model has been approximated in the form of Takagi-Sugeno-Kang fuzzy inference system, with architecture in neural-network model. ANFIS (Adaptive Neuro-Fuzzy Inference System) has been utilized to determine NARX or ARX parameters model describing the dynamic of Industrial operational data have been used for training and validating the model. The optimization problem has been addressed through the utilization of Constrained Nonlinear Programming. The aim is to find the optimal process and ratio controller parameters to achieve the maximum Hydrogen formation. For a maximum fixed production rate of hydrogen produced by the unit, minimization of methane feed rate is chosen as the objective function to meet processing requirements. Keywords : Hydrocarbons, Model identification, ANFIS Normal 0 false false false IN X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

Zitieren

APA

Nugrahani, S. D., Nazaruddin, Y. Y., Ekawati, E., & Nugroho, S. (2009). Modelling and Optimization of Primary Steam Reformer System Case Study: the Primary Reformer PT Petrokimia Gresik Indonesia. Jurnal Otomasi Kontrol dan Instrumentasi. https://doi.org/10.5614/joki.2009.1.1.1

Vancouver

Nugrahani SD, Nazaruddin YY, Ekawati E, Nugroho S. Modelling and Optimization of Primary Steam Reformer System Case Study: the Primary Reformer PT Petrokimia Gresik Indonesia. Jurnal Otomasi Kontrol dan Instrumentasi. 2009. doi:10.5614/joki.2009.1.1.1

BibTeX
@article{Nugrahani2009,
  author = {Nugrahani, S D. and Nazaruddin, Y. Y. and Ekawati, E. and Nugroho, S.},
  title = {Modelling and Optimization of Primary Steam Reformer System Case Study: the Primary Reformer PT Petrokimia Gresik Indonesia},
  journal = {Jurnal Otomasi Kontrol dan Instrumentasi},
  year = {2009},
  doi = {10.5614/joki.2009.1.1.1}
}
Kostenlos starten →