EUVIMEDEUVIMED entdecken
Crossref

Experimental Assessment of the Effectiveness of Cutting Fluid Delivery Using Minimum Quantity Lubrication (MQL)

Ryszard Stanisław Wójcik

Journal of Engineering 360 · 2026

DOI: 10.5604/01.3001.0055.9078 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering 360, 2026. Verfasst von Ryszard Stanisław Wójcik.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the results of research on a cooling and lubricating fluid fed with minimal flow. A test stand is proposed for testing the actual MQL efficiency in both enclosed and free-space environments. Test results are presented for various nozzle diameters and two cooling and lubricating fluids with different chemical compositions used in conventional grinding processes. The influence of pressure, nozzle-to-surface distance, and fluid type on the mass uptake of the cotton pads was determined. The results showed that the highest values of mass uptake were obtained at a nozzle-to-surface distance of 25 mm, while under the investigated conditions, Biocut 3000 exhibited a higher mass uptake than propylene glycol. In the open-space experiments, the diameter of the oil mist interaction zone was also determined as a function of the nozzle-to-surface distance. Based on the experimental results, a limiting distance of 30 mm was adopted as the effective PCS delivery distance under the investigated conditions.

Zitieren

APA

Wójcik, R. S. (2026). Experimental Assessment of the Effectiveness of Cutting Fluid Delivery Using Minimum Quantity Lubrication (MQL). Journal of Engineering 360. https://doi.org/10.5604/01.3001.0055.9078

Vancouver

Wójcik RS. Experimental Assessment of the Effectiveness of Cutting Fluid Delivery Using Minimum Quantity Lubrication (MQL). Journal of Engineering 360. 2026. doi:10.5604/01.3001.0055.9078

BibTeX
@article{Wjcik2026,
  author = {Wójcik, Ryszard Stanisław},
  title = {Experimental Assessment of the Effectiveness of Cutting Fluid Delivery Using Minimum Quantity Lubrication (MQL)},
  journal = {Journal of Engineering 360},
  year = {2026},
  doi = {10.5604/01.3001.0055.9078}
}
Kostenlos starten →