EUVIMEDEUVIMED entdecken
Crossref

Methodology for Numerical Verification of Tooling Strength in the Manufacturing Process of the 23 mm Caliber Projectile Driving Band

Michał Grązka, Kamil Cieplak, Tomasz Majewski

Military Technology and Science · 30.06.2026 · 75 (2) · 19-27

DOI: 10.5604/01.3001.0055.8281 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Military Technology and Science, erschienen am 30.06.2026. Verfasst von Michał Grązka und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article describes a methodology for performing structural strength analysis of tooling used in the driving band manufacturing process, based on the Finite Element Method (FEM). Computer analyses were conducted to investigate the physical phenomena accompanying selected processes related to the production of a driving band for a 23 mm caliber projectile. Within the performed numerical analyses, particular attention was focused on verifying the limit values of parameters describing the processes of forming the preform and swaging the driving band of the 23 mm caliber projectile, achievable using the available tooling. The results of these computer analyses enabled the verification of parameters intended for the preform forming and band swaging process on the 23 mm caliber projectile body. The values of these parameters guarantee that the implemented processes

will not lead to damage to the tools used during pressing and swaging and will enable the execution of the driving band manufacturing process.

Zitieren

APA

Grązka, M., Cieplak, K., & Majewski, T. (2026). Methodology for Numerical Verification of Tooling Strength in the Manufacturing Process of the 23 mm Caliber Projectile Driving Band. Military Technology and Science, 75(2), 19-27. https://doi.org/10.5604/01.3001.0055.8281

Vancouver

Grązka M, Cieplak K, Majewski T. Methodology for Numerical Verification of Tooling Strength in the Manufacturing Process of the 23 mm Caliber Projectile Driving Band. Military Technology and Science. 2026;75(2):19-27. doi:10.5604/01.3001.0055.8281

BibTeX
@article{Grzka2026,
  author = {Grązka, Michał and Cieplak, Kamil and Majewski, Tomasz},
  title = {Methodology for Numerical Verification of Tooling Strength in the Manufacturing Process of the 23 mm Caliber Projectile Driving Band},
  journal = {Military Technology and Science},
  year = {2026},
  volume = {75},
  number = {2},
  pages = {19--27},
  doi = {10.5604/01.3001.0055.8281}
}
Kostenlos starten →