Design of a personalised knee protector shell for sports applications
Archives of Materials Science and Engineering · 01.03.2026
DOI: 10.5604/01.3001.0055.8007 ↗Kurz gefasst
Fachartikel in der Zeitschrift Archives of Materials Science and Engineering, erschienen am 01.03.2026. Verfasst von A. Kania und 3 weiteren Autor:innen.
Abstract (Originalsprache)
The aim of the work is to design and numerically analyse a personalised knee protector shell for sports applications. The subject of this research is the outer protective shell, a key element responsible for transferring and dissipating loads from impacts or falls.
The work included 3D scanning, geometric modelling of the protector shell, and numerical analysis using the Finite Element Method (FEM). The analysis enables assessment of stress distribution, strain, displacement, and structural behaviour under applied loads, thereby verifying the adopted design assumptions.
The protector’s shell is designed as a composite element, made of fibreglass and epoxy resin, with a constant thickness of 3 mm. The use of composite materials is due to their favourable mechanical properties, such as a high strength-to-weight ratio, damage resistance, and the ability to shape complex geometries. Simulation results showed that at a load of At 10 kN, the permissible stress state of the material was exceeded locally at the point where the force was applied, which could initiate composite damage. Based on additional analyses, a safe operating force of 7.5 kN was determined. In this case, the shell layers do not fail, and stresses and displacements remain within safe limits.
The obtained analysis results indicate that the designed structure fulfils its protective function under real-world conditions. They can serve as a basis for assessing the effectiveness of the designed shell and its suitability for sports applications.
The obtained results confirm the validity of using 3D scanning technology and numerical analyses in the design process for personalised sports protectors and can serve as a basis for further development work, including dynamic analysis, experimental studies, and layered optimisation of the composite.
Zitieren
APA
Kania, A., Pośpiech, G., Polok-Rubiniec, M., & Włodarczyk-Fligier, A. (2026). Design of a personalised knee protector shell for sports applications. Archives of Materials Science and Engineering. https://doi.org/10.5604/01.3001.0055.8007
Vancouver
Kania A, Pośpiech G, Polok-Rubiniec M, Włodarczyk-Fligier A. Design of a personalised knee protector shell for sports applications. Archives of Materials Science and Engineering. 2026. doi:10.5604/01.3001.0055.8007
BibTeX
@article{Kania2026,
author = {Kania, A. and Pośpiech, G. and Polok-Rubiniec, M. and Włodarczyk-Fligier, A.},
title = {Design of a personalised knee protector shell for sports applications},
journal = {Archives of Materials Science and Engineering},
year = {2026},
doi = {10.5604/01.3001.0055.8007}
}
EUVIMED