EUVIMEDEUVIMED entdecken
Crossref

Effect of composition, particle morphology and size distribution on the technological properties of cobalt-free metal bond powders for stone-processing diamond tools

Y.I. Boiko, A.M. Trostianchyn, V.V. Kulyk, Z.A. Duriagina, T.M. Kovbasiuk, I.A. Lemishka

Journal of Achievements in Materials and Manufacturing Engineering · 01.03.2026

DOI: 10.5604/01.3001.0055.8003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Achievements in Materials and Manufacturing Engineering, erschienen am 01.03.2026. Verfasst von Y.I. Boiko und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of the work is to establish how the composition, morphology, local elemental heterogeneity, particle size distribution, and technological properties of industrial powder mixtures influence their suitability as cobalt-free metal bonds for diamond-containing tool materials intended for stone processing.



Commercial powders were used to prepare cobalt-free metal powder mixtures of the Cu–Sn, Cu–Sn–Ni–Fe, and Cu–Sn–Fe–Fe(carb)–Zn–Ni systems. The elemental composition of the mixtures was determined by X-ray fluorescence analysis. Particle morphology and local elemental distribution were studied by scanning electron microscopy and energy-dispersive X-ray spectroscopy, including Quant and Phase mapping. Particle size characteristics were evaluated from SEM images using ImageJ software, with the Feret diameter as the particle-size parameter; the distributions were described using the percentiles d10, d50, and d90, as well as the Span value. The bulk density was determined using a 25 cm3 measuring cup, and the flowability was evaluated as the corrected flow time through a calibrated funnel. Additional SEM/EDS observations were performed for a selected diamond-containing composition based on the Cu–Sn–Fe–Fe(carb)–Zn–Ni system



The investigated powder systems differ substantially in particle morphology, local chemical heterogeneity, particle size distribution, and technological behaviour. The Cu–Sn system is characterised by a predominantly Cu-rich matrix with localised Sn-rich regions. The Cu–Sn–Ni–Fe system exhibits the broadest particle-size distribution, the highest degree of polydispersity (Span = 2.13), and the poorest flowability. The Cu–Sn–Fe–Fe(carb)–Zn–Ni system exhibits the highest local compositional complexity but also the most compact particle-size distribution (Span = 1.22), along with a comparatively favourable combination of high bulk density and acceptable flowability. Diamond addition decreases bulk density and worsens flowability across all investigated systems; however, the Cu–Sn–Fe–Fe(carb)–Zn–Ni composition retains comparatively favourable technological characteristics among the powder mixtures investigated.



The present study focuses on the characterisation of powder mixtures before consolidation and does not include analysis of the sintered microstructure, mechanical properties, or tool performance under service conditions. Further work should therefore be directed toward sintering behaviour, microstructure formation in the consolidated bond, and performance testing of diamond-containing materials during stone processing.



The results obtained enable comparative assessment of candidate cobalt-free powder matrices for diamond-containing compositions and optimisation of powder mixture preparation based on composition, particle morphology, particle size distribution, and technological properties.



A comparative analysis of cobalt-free powder mixtures for diamond-tool metal bonds was conducted using a unified approach that combined XRF, SEM/EDS Quant and Phase mapping, particle size analysis, and technological testing. It was shown that the most compositionally complex system, Cu–Sn–Fe–Fe(carb)–Zn–Ni, provides the most balanced set of structural and technological characteristics and is therefore the most promising powder matrix among the investigated systems.

Zitieren

APA

Boiko, Y., Trostianchyn, A., Kulyk, V., Duriagina, Z., Kovbasiuk, T., & Lemishka, I. (2026). Effect of composition, particle morphology and size distribution on the technological properties of cobalt-free metal bond powders for stone-processing diamond tools. Journal of Achievements in Materials and Manufacturing Engineering. https://doi.org/10.5604/01.3001.0055.8003

Vancouver

Boiko Y, Trostianchyn A, Kulyk V, Duriagina Z, Kovbasiuk T, Lemishka I. Effect of composition, particle morphology and size distribution on the technological properties of cobalt-free metal bond powders for stone-processing diamond tools. Journal of Achievements in Materials and Manufacturing Engineering. 2026. doi:10.5604/01.3001.0055.8003

BibTeX
@article{Boiko2026,
  author = {Boiko, Y.I. and Trostianchyn, A.M. and Kulyk, V.V. and Duriagina, Z.A. and Kovbasiuk, T.M. and Lemishka, I.A.},
  title = {Effect of composition, particle morphology and size distribution on the technological properties of cobalt-free metal bond powders for stone-processing diamond tools},
  journal = {Journal of Achievements in Materials and Manufacturing Engineering},
  year = {2026},
  doi = {10.5604/01.3001.0055.8003}
}
Kostenlos starten →