EUVIMEDEUVIMED entdecken
Crossref

Study of residual gas displacement by nitrogen from depleted gas reservoir

R.M. Kondrat, L.I. Matiishyn

Journal of Achievements in Materials and Manufacturing Engineering · 01.02.2026

DOI: 10.5604/01.3001.0055.7980 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Achievements in Materials and Manufacturing Engineering, erschienen am 01.02.2026. Verfasst von R.M. Kondrat und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Study of the impact of key determining factors, in particular the rate of nitrogen injection and the number of injection wells (one or three wells), on the final gas recovery factor and the gas recovery factor for residual gas.



Using the Petrel & Eclipse software package, two scenarios for displacing residual gas with nitrogen from a depleted gas field were investigated. In the first scenario, nitrogen was continuously injected into the field at different rates into a single injection well located in the centre of the field. The ratio of the nitrogen injection rate to the current natural gas production was 1, 1.25, 1.5, 1.75, 2, 2.5. In the second scenario, continuous nitrogen injection into the deposit was carried out at different rates (1, 1.25, 1.5, 1.75, 2, 2.5) into three injection wells (one central well and two production wells, one and three, were converted into injection wells).



The results of the studies are presented in tables and graphical representations of the studied parameters. According to the results of studies under the scenario of one injection well with an increase in the degree of compensation of current natural gas production by nitrogen injection Qn/Qg from 1 to 2.5, respectively, the total gas recovery factor βg decreases from 95.15 to 93.57%, the residual gas recovery factor βres decreases from 51.09 to 35.19%, and the duration of deposit development decreases from 305 to 191 days. In scenario two, with three injection wells and an increase in Qn/Qg from 1 to 2.5, βg decreases from 95.80% to 94.44%, βres decreases from 57.66 to 43.93%, and the term of deposit development is reduced from 329 to 250 days. The highest gas recovery factor for the deposit is obtained with three injection wells.



The limitation of the study is the use of a simplified hydrodynamic model of a depleted gas reservoir with homogeneous filtration and storage properties (porosity and permeability). Real geological structures may be characterised by tectonic disturbances and lithological variability, which will significantly affect the formation of the nitrogen-natural gas mixing front and the rate of nitrogen breakthrough into production wells.



The research results have direct practical applications in the design of technologies for recovering residual gas from depleted fields. The obtained dependencies enable us to determine the optimal number of injection wells and nitrogen injection rates to achieve the maximum gas recovery factor while minimising development time. The results of modelling in the Petrel & Eclipse software package serve as the basis for developing design solutions for modernising production systems in the late stage of field operations.



The study is original because it is the first comprehensive analysis of the relationship between the number of injection wells and the degree of compensation of current production by nitrogen injection for depleted gas fields.

Zitieren

APA

Kondrat, R., & Matiishyn, L. (2026). Study of residual gas displacement by nitrogen from depleted gas reservoir. Journal of Achievements in Materials and Manufacturing Engineering. https://doi.org/10.5604/01.3001.0055.7980

Vancouver

Kondrat R, Matiishyn L. Study of residual gas displacement by nitrogen from depleted gas reservoir. Journal of Achievements in Materials and Manufacturing Engineering. 2026. doi:10.5604/01.3001.0055.7980

BibTeX
@article{Kondrat2026,
  author = {Kondrat, R.M. and Matiishyn, L.I.},
  title = {Study of residual gas displacement by nitrogen from depleted gas reservoir},
  journal = {Journal of Achievements in Materials and Manufacturing Engineering},
  year = {2026},
  doi = {10.5604/01.3001.0055.7980}
}
Kostenlos starten →