EUVIMEDEUVIMED entdecken
Crossref

Determination of antibacterial activity of polymer composite materials

A. Włodarczyk-Fligier, A. Kania, M. Polok-Rubiniec

Archives of Materials Science and Engineering · 01.01.2026

DOI: 10.5604/01.3001.0055.7963 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Materials Science and Engineering, erschienen am 01.01.2026. Verfasst von A. Włodarczyk-Fligier und 2 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study focuses on the antibacterial activity of WPC polymer composite materials manufactured with walnut and hazelnut shell flour fillers against the reference strains Escherichia coli and Staphylococcus aureus.



The antibacterial activity of the manufactured WPC polymer composite materials with natural fillers was determined in accordance with the PN-EN ISO 20645:2006 standard. Two reference bacterial strains were used in the tests: Escherichia coli and Staphylococcus aureus.



An agar medium (tryptone peptone – 15 g/l, phyton peptone – 5 g/l, sodium chloride – 5 g/l, agar-agar – 15 g/l) was poured onto each Petri dish and allowed to gel. The medium was then inoculated with cultures of Escherichia coli and Staphylococcus aureus bacteria at a concentration of 1.5 x 108 cfu/ml. The WPC samples to be tested and the control samples, in the shape of a circle with a diameter of 255 mm, were placed centrally on the prepared dishes. The plates were incubated for 20 hours at 371C. After the incubation period, the presence or absence of zones of inhibition of microorganism growth on the tested samples was determined.



Based on the conducted tests, a lack of efficacy was observed, as required by the standard. Analysis of the results shows that none of the tested samples met the required criteria for a "good" antibacterial effect. The absence of inhibition zones (0 mm) and the presence of bacterial colonies under the tested samples disqualify the samples as materials with full antibacterial properties. The key reason for the absence of inhibition zones (0 mm) is likely the lack of diffusion of the active ingredient into the agar. It is worth noting that for the E. coli strain, "weak growth" was observed with the tested sample, suggesting partial, albeit insufficient, bacteriostatic activity. In the case of St. aureus, the effect was completely unsatisfactory, indicating that several issues need to be addressed.



The article summarises research on improving the antibacterial properties of manufactured polymer composite materials to support their further development and use.



The presented results may constitute material for further research on the antibacterial resistance of WPC composites.

Zitieren

APA

Włodarczyk-Fligier, A., Kania, A., & Polok-Rubiniec, M. (2026). Determination of antibacterial activity of polymer composite materials. Archives of Materials Science and Engineering. https://doi.org/10.5604/01.3001.0055.7963

Vancouver

Włodarczyk-Fligier A, Kania A, Polok-Rubiniec M. Determination of antibacterial activity of polymer composite materials. Archives of Materials Science and Engineering. 2026. doi:10.5604/01.3001.0055.7963

BibTeX
@article{WodarczykFligier2026,
  author = {Włodarczyk-Fligier, A. and Kania, A. and Polok-Rubiniec, M.},
  title = {Determination of antibacterial activity of polymer composite materials},
  journal = {Archives of Materials Science and Engineering},
  year = {2026},
  doi = {10.5604/01.3001.0055.7963}
}
Kostenlos starten →