EUVIMEDEUVIMED entdecken
Crossref

Numerical Modelling of the Shaped Charge Jet Formation Process using the Axisymmetric 2D ALE (Arbitrary Lagrangian–Eulerian) Approach

Artur KŁOSIŃSKI (artur.klosinski@wat.edu.pl), Radosław TRĘBIŃSKI (radosław.trebinski@wat.edu.pl), Michał JASZTAL (michal.jasztal@wat.edu.pl)

Problems of Mechatronics Armament Aviation Safety Engineering · 30.06.2026 · 17 (2) · 31-46

DOI: 10.5604/01.3001.0055.7912 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Problems of Mechatronics Armament Aviation Safety Engineering, erschienen am 30.06.2026. Verfasst von Artur KŁOSIŃSKI (artur.klosinski@wat.edu.pl) und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Shaped charges are widely used explosive devices designed for effective penetration of armoured and solid targets. Their performance depends on the controlled collapse of a metallic liner under detonation pressure, resulting in the formation of a high-velocity jet. Due to the extremely high strain rates and short time scales involved, experimental investigations are often limited. Numerical modelling has therefore become a key tool for analysing shaped-charge behaviour. This study aimed to construct a high‑fidelity LS‑Dyna model of a classical shaped charge, with particular focus on selecting appropriate material models and equations of state, implementing detonation physics, and analysing jet formation. The model incorporates the relevant material properties and boundary conditions. Simulation results were benchmarked against experimental data, including X‑ray radiographs of jet formation, and cross‑validated using the free-particles method. These analyses verified the numerical model and yielded deeper insight into the mechanisms governing jet formation and overall charge performance.

Zitieren

APA

(artur.klosinski@wat.edu.pl), A. K., (radosław.trebinski@wat.edu.pl), R. T., & (michal.jasztal@wat.edu.pl), M. J. (2026). Numerical Modelling of the Shaped Charge Jet Formation Process using the Axisymmetric 2D ALE (Arbitrary Lagrangian–Eulerian) Approach. Problems of Mechatronics Armament Aviation Safety Engineering, 17(2), 31-46. https://doi.org/10.5604/01.3001.0055.7912

Vancouver

(artur.klosinski@wat.edu.pl) AK, (radosław.trebinski@wat.edu.pl) RT, (michal.jasztal@wat.edu.pl) MJ. Numerical Modelling of the Shaped Charge Jet Formation Process using the Axisymmetric 2D ALE (Arbitrary Lagrangian–Eulerian) Approach. Problems of Mechatronics Armament Aviation Safety Engineering. 2026;17(2):31-46. doi:10.5604/01.3001.0055.7912

BibTeX
@article{arturklosinskiwatedupl2026,
  author = {(artur.klosinski@wat.edu.pl), Artur KŁOSIŃSKI and (radosław.trebinski@wat.edu.pl), Radosław TRĘBIŃSKI and (michal.jasztal@wat.edu.pl), Michał JASZTAL},
  title = {Numerical Modelling of the Shaped Charge Jet Formation Process using the Axisymmetric 2D ALE (Arbitrary Lagrangian–Eulerian) Approach},
  journal = {Problems of Mechatronics Armament Aviation Safety Engineering},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {31--46},
  doi = {10.5604/01.3001.0055.7912}
}
Kostenlos starten →